Bedienungsanleitung Garmin Varia Rearview Radar RTL 511 (Seite 5 von 12) (Englisch)

691283

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Introduction

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

The device can improve situational awareness. It is not a

replacement for cyclist attentiveness and good judgement.

Always use your best judgment, and operate the bicycle in a

safe manner.

Getting Started

You can use the Varia RTL (radar taillight) with the Varia RDU

(radar display unit) or with your compatible Garmin

device. This

list provides an overview of the installation and setup tasks.

• Charge the device (Charging the Device, page 4).

• Install the universal mount (Installing the Universal Mount,

page 1).

• If you are using the Varia RDU, install it on your bike stem or

handlebar (Installing the Varia RDU Device, page 2).

NOTE: When you purchase the Varia RTL and RDU devices

together, they are already paired.

• If you are using an Edge

1030 device, pair the devices

(Pairing the Taillight with Your Edge 1030, page 2).

• If you are using another Garmin device, pair the devices

(Other Compatible Devices, page 4).

Tips for Installing the Device

The Varia RTL device includes a taillight and micro radar that

can detect approaching vehicles up to 140 meters away.

• Select a secure location to mount the device where it does

not interfere with the safe operation of your bike.

• Mount the device as high on the seat post as possible for

optimal light visibility and radar detection.

NOTE: The mount surface should be vertical. There is a 15-

degree angle between vertical and a typical seat post.

• Mount the Varia RTL511 device on the seat post 250 mm to

1200 mm above the road.

• Install the device correctly.

The device faces backward and is perpendicular to the road.

• Go for a test ride during the day in a safe environment.

Installing the Universal Mount

Select a rubber pad

based on your seat post shape, and

place the rubber pad on the back of the universal mount.

Place the universal mount on the seat post.

Attach the universal mount securely using one band

Align the tabs on the back of the device with the universal

mount notches

Press down slightly and turn the device clockwise until it

locks into place.

Device Overview

Device key Press to change light modes.

Hold for 1 second to turn the device on.

Hold for 2 seconds to enter pairing mode when the

device is turned off.

Hold for 2 seconds to turn the device off.

Status

LED

Changes color based on the battery level, pairing

status, and charging status.

Varia RTL Status LED

LED Activity Status

Flashing purple The device is in pairing mode.

Flashing blue The device is in smart mode and can be

controlled by a paired Varia RDU or

compatible Garmin device.

Flashing red The battery is low.

Flashing green The device is charging.

Solid green Charging is complete.

Solid red An error occurred while charging.

Alternating blue and

green

The device is updating software.

Turning Off the Taillight

Hold the device key for 2 seconds.

Introduction 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Varia Rearview Radar RTL 511 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Varia Rearview Radar RTL 511

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info