Bedienungsanleitung Garmin Varia RTL516 (Seite 10 von 14) (Englisch)

772777

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Specifications

Varia RTL515/RTL516 Specifications

Battery type Rechargeable, built-in lithium-ion battery

RTL515 battery life Up to 6 hr. in solid mode

Up to 8 hr. in peloton mode

Up to 6 hr. in night flash mode

Up to 16 hr. in day flash mode

Up to 3 mo. in standby mode

RTL516 battery life Up to 9 hr. in solid mode

Up to 3 mo. in standby mode

Operating

temperature range

From -20º to 50ºC (from -4º to 122ºF)

Charging

temperature range

From 0º to 45ºC (from 32º to 113ºF)

Wireless

frequencies

2.4 GHz @ 0 dBm nominal; 24 GHz @ 13.6 dBm

nominal

Water rating IEC 60529 IPX71

RTL515 LED

luminous flux

20 lm (solid mode)

8 lm (peloton mode)

29 lm (night flash mode)

65 lm (day flash mode)

RTL516 LED

luminous flux

5 lm (solid mode only)

Certified for use in Germany

Varia RDU Specifications

Battery type Rechargeable, built-in lithium-ion battery

Battery life Up to 10 hr., typical usage

Operating temperature range From -20º to 60ºC (from -4º to 140ºF)

Charging temperature range From 0º to 45ºC (from 32º to 113ºF)

Wireless frequency 2.4 GHz ANT+ @ 0 dBm nominal

Water rating IEC 60529 IPX71

Troubleshooting

Resetting the Device

You can reset the device if it stops responding.

Hold the device key for 8 seconds until all the LEDs turn off.

Resetting deletes the pairing connections from the device.

Updating the Radar Software With Your Edge

Device

Before you can update the Varia radar software, you must pair

the radar device with your Edge device, you must have a

Garmin Connect™ account, and you must pair the Edge device

with a compatible smartphone.

1Bring the Edge device within 3 m (10 ft.) of the radar device.

2Sync your Edge device with the Garmin Connect app.

When new software is available, your device alerts you to

update the software.

3Follow the on-screen instructions.

The taillight LED flashes blue and green to indicate the device is

updating. When the update is complete, the LED flashes green

20 times.

Taillight Status LED for Software Updates

LED Activity Status

Flashing blue and green The device is uploading software.

Flashing green The software update is complete and

successful.

Flashing red The software update failed.

1 The device withstands incidental exposure to water of up to 1 m for up to 30 min.

For more information, go to www.garmin.com/waterrating.

Product Updates

On your computer, install Garmin Express™ (www.garmin.com

/express).

This provides easy access to these services for Garmin devices:

• Software updates

• Product registration

Updating the Software Using the Garmin Express

Application

Before you can update your device software, you must

download the Garmin Express application.

1Connect the radar device to your computer using the USB

cable.

Garmin Express looks for software updates automatically and

sends them to your device.

2Follow the on-screen instructions.

3Disconnect the device, and turn it on.

The radar LED flashes blue and green to indicate the device

is updating. When the update is complete, the LED flashes

green 20 times.

The radar device is not responding

During a ride, if the radar device status LED is solid red, the

device is in an error state.

• Make sure the device is within the approved operating

temperature range (Varia RTL515/RTL516 Specifications,

page 6).

• Turn the device off, and turn it back on.

You can check the battery level on the Sensors menu of

your Edge device or on the Varia app.

• Avoid multiple sources of radar interference.

Radar detection does not work indoors

The device is tuned to detect vehicles in an outdoor setting. If

you turn on the device indoors, a saturation alert can occur.

When you take the device outdoors, the device resumes normal

operation.

The radar device does not turn on

• Make sure the device is within the approved operating or

charging temperature range (Varia RTL515/RTL516

Specifications, page 6).

• Charge the device for 4 hours (Charging the Device, page 5).

If the device does not turn on, disconnect the charger, and

charge for another 4 hours.

The status LED is flashing yellow

If the radar device status LED flashes yellow, the device is in

demo mode. When the radar device is in demo mode, artificial

data is generated for demonstration only.

To exit demo mode, select an option:

• Turn the device off, and turn it back on.

• Hold the device key for 8 seconds to reset the device.

The status LED turns red while charging

• Check the USB cable, connectors, and ports for damage.

• Make sure the power source is generating power.

You can check this several ways. For example, you can

check whether other devices powered by the source are

functioning.

• Make sure the device is within the approved charging

temperature range (Varia RTL515/RTL516 Specifications,

page 6).

6 Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Varia RTL516 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Varia RTL516

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info