Bedienungsanleitung Garmin Vector 3S (Seite 6 von 14) (Englisch)

691273

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Align the cleat

, washers

, and bolts

Use a 4 mm hex key to loosely attach each bolt to the sole of

the shoe.

Adjust the cleat to the shoe in your preferred position.

This can be adjusted after a trial ride.

Tighten the cleat firmly to the shoe.

NOTE: Garmin recommends torque of 4 to 6 lbf-ft. (5 to 8 N-

m).

Adjusting the Release Tension

NOTICE

Do not overtighten the release tension screw on the bottom of

the pedal. The release tension should be adjusted equally for

both pedals.

Use a 3 mm hex key to adjust the release tension of each

pedal.

There is a window on the back of the pedal binding that

shows the allowable range.

About the Vector 3S System

The single-sensing Vector 3S measures forces on the left pedal

in order to approximate your total power. For information about

upgrading, see Upgrading Your Vector 3S to a Dual Sensing

System, page 6.

NOTE: The Vector 3S system does not support cycling

dynamics.

Pairing Vector with Your Edge 1030

Before you can view Vector data on the Edge device, you must

pair the devices.

Pairing is the connecting of ANT+

wireless sensors. This

procedure contains instructions for the Edge 1030. If you have

another compatible device, see Other Compatible Devices,

page 6, or go to www.garmin.com/manuals/vector3.

Bring the Edge device within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Turn on the Edge device.

Select > Sensors > Add Sensor > Power.

Rotate the crank arm.

Select your sensor.

Select Add.

When the sensor is paired with your device, is solid. You

can customize a data field to display power data

(Customizing the Data Fields, page 2).

Your First Ride

Before you ride with Vector for the first time, you must enter the

crank length. The Vector system automatically calibrates after

each ride. You must also enter the crank length when you move

Vector to another bike.

This procedure contains instructions for the Edge 1030 device. If

you have another compatible device, see Other Compatible

Devices, page 6, or go to www.garmin.com/manuals/vector3.

Entering the Crank Length

The crank length is often printed on the crank arm. This

procedure contains instructions for the Edge 1030. If you have

another compatible device, see Other Compatible Devices,

page 6, or see your owner's manual.

Rotate the pedals a few times in order to activate Vector.

Select > Sensors.

Select your sensor.

Select Sensor Details > Crank Length.

Enter the crank length, and select .

Customizing the Data Fields

This procedure contains instructions for the Edge 820, 1000,

and 1030 devices. If you have another compatible device, see

your owner's manual.

Hold a data field to change it.

Select a category.

Select a data field.

Training

Pedal-Based Power

Vector measures pedal-based power.

Vector measures the force you apply a few hundred times every

second. Vector also measures your cadence or rotational

pedaling speed. By measuring the force, the direction of force,

the rotation of the crank arm, and time, Vector can determine

power (watts). Because Vector independently measures left and

right leg power, it reports your left-right power balance.

NOTE: The Vector S system does not provide left-right power

balance.

Cycling Dynamics

Cycling dynamics metrics measure how you apply power

throughout the pedal stroke, and where you apply power on the

pedal, allowing you to understand your particular way of riding.

Understanding how and where you produce power allows you to

train more efficiently and evaluate your bike fit.

NOTE: You must have a dual sensing Vector system to use

cycling dynamics metrics.

For more information, go to www.garmin.com/cyclingdynamics.

Using Cycling Dynamics

Before you can use cycling dynamics, you must pair the Vector

power meter with your device (Pairing Vector with Your Edge

1030, page 2).

NOTE: Recording cycling dynamics uses additional device

memory.

Go for a ride.

Scroll to the cycling dynamics screen to view your power

phase data

, total power

, and platform center offset

2 Training

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Vector 3S Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Vector 3S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info