Bedienungsanleitung Garmin Vector S (Seite 5 von 14) (Englisch)

589620

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Introduction

WARNING

Read all instructions carefully before installing and using the

Vector system. Improper use could result in serious injury.

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

NOTICE

Go to www.garmin.com/vectorowner for the latest information

including bike compatibility, software updates, and video

tutorials.

Thank You

Thank you for your Vector or Vector S purchase. This manual

covers both Vector systems.

Vector was designed for cyclists, by cyclists, to provide an

outstanding experience of owning a precision power

measurement system for your bike.

Vector is simple, accurate, and easy to use.

For software updates, video tutorials, and everything you need

to get years of service out of your Vector, go to

www.garmin.com/vectorowner.

Now it's time to put the power under your feet and get out there

and ride.

Getting Started

1Install the Vector components (Installing the Vector

Components).

2Install the shoe cleats (Installing the Shoe Cleats).

3Pair Vector with your Edge® (Paring Vector with Your Edge

1000).

4Go for a ride (Your First Ride).

5View your history (Vector Data).

6Send your history to your computer (Sending Your Ride to

Garmin Connect).

Tools Needed

• 15 mm pedal wrench

• Bike grease

• 3 mm hex key

• 4 mm hex key

Installing the Vector Components

The installation steps for the Vector and Vector S systems are

very similar. Procedures that are specific to the Vector S system

are noted.

Preparing the Crank Arms

1Confirm the compatibility of your bike at www.garmin.com

/vectorowner.

2Remove the existing pedals.

3Clean the threads, and remove old grease.

Determining Pedal Pod Clearance

NOTICE

The pedal pod should contact the crank arm only at its mounting

face, because this is the load-bearing connection. If the pedal

pod contacts the crank arm anywhere else, the pedal pod may

fracture when the pedal is tightened.

• If the mounting face À surrounding the threaded hole in the

crank arm is recessed, use one or two washers Á to fill the

recess.

NOTE: Do not use more than two washers.

• Make sure the pedal pod mounting face Â contacts the crank

arm only at its mounting face (or the washer used to fill the

recess).

If it touches anywhere else, you can use another washer to

provide the necessary clearance.

• If it is close, you can confirm proper clearance by sliding a

piece of paper between the metal bracket and the crank arm

face.

• If the mounting face of the crank arm is protruding, do not

use washers.

Determining the Bicycle Chain Clearance

Before you can install the right pedal, you must determine

bicycle chain clearance.

Move your bike chain to the largest chain ring and the

smallest cassette gear.

The bike chain should be in the outermost position to

determine proper clearance between the pedal pod cable

and the chain.

NOTE: There must be at least 5 mm clearance À between

the chain and the crank arm.

Installing the Pedal Pod and Pedal

This procedure is for the Vector system. For the Vector S

system, see Installing the Left Pedal and Pedal Pod.

NOTE: The left and right pedal pods are the same.

1Install the left pedal first.

2Apply a thin layer of grease on the pedal spindle À and the

pedal pod Á where it contacts the pedal spindle.

Introduction 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Vector S Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Vector S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info