Bedienungsanleitung Garmin Vector S (Seite 11 von 14) (Englisch)

589620

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Balance - 10s Avg.: The 10-second moving average of the left/

right power balance.

Balance - 30s Avg.: The 30-second moving average of the left/

right power balance.

Balance - 3s Avg.: The three-second moving average of the

left/right power balance.

Balance - Avg.: The average left/right power balance for the

current activity.

Balance - Lap: The average left/right power balance for the

current lap.

Cadence: The number of revolutions of the crank arm or

number of strides per minute. Your device must be

connected to a cadence accessory for this data to appear.

Cadence - Avg.: The average cadence for the current activity.

Cadence - Lap: The average cadence for the current lap.

Pedal Smoothness: The measurement of how evenly a rider is

applying force to the pedals throughout each pedal stroke.

Power: The current power output in watts.

Power - %FTP: The current power output as a percentage of

functional threshold power.

Power - 10s Avg.: The 10-second moving average of power

output.

Power - 30s Avg.: The 30-second moving average of power

output.

Power - 3s Avg.: The three-second moving average of power

output.

Power - Avg.: The average power output for the current activity.

Power - IF: The Intensity Factor™ for the current activity.

Power - kJ: The accumulated work performed (power output) in

kilojoules.

Power - Lap: The average power output for the current lap.

Power - Lap Max.: The top power output for the current lap.

Power - Last Lap: The average power output for the last

completed lap.

Power - Max.: The top power output for the current activity.

Power - NP: The Normalized Power™ for the current activity.

Power - NP Lap: The average Normalized Power for the

current lap.

Power - NP Last Lap: The average Normalized Power for the

last completed lap.

Power - TSS: The Training Stress Score™ for the current

activity.

Power - watts/kg: The amount of power output in watts per

kilogram.

Power Zone: The current range of power output (1 to 7) based

on your FTP or custom settings.

Torque Effectiveness: The measurement of how efficiently a

rider is pedaling.

Troubleshooting

Updating the Software Using Vector Updater

Before you can run the Vector Updater application, you must

have a USB ANT Stick (included), an internet connection, and

the pedal pods must have functioning batteries installed.

1Go to www.garmin.com/vectorowner, and download the

Vector Updater application.

2Bring Vector within range (3 m) of your computer.

3Open the Vector Updater application, and follow the on-

screen instructions.

Tips for Using Vector Updater

If Vector Updater is not functioning properly, you can try these

tips.

• Insert the USB ANT Stick directly into a USB port on your

computer. USB hubs are not recommended.

• If you are also running the ANT Agent™ application on your

computer, you can either insert another USB ANT Stick or

close the ANT Agent application.

• If Vector Updater cannot find your device after more than two

minutes, remove the batteries from each pedal pod, wait 20

seconds, and replace the batteries.

If Vector Updater still cannot find your device, you should

install new batteries into each pedal pod.

Performing a Static Torque Test

NOTICE

The static torque test is intended for advanced cyclists and

installation experts. This test is not required under normal

circumstances to achieve good results with the Vector system.

This test is available for the Edge 1000, 810, and 510 devices.

Garmin recommends performing the static torque test a

minimum of three times and averaging the reported torque

values.

Go to www.garmin.com/vectorowner, and click on the FAQs

link for detailed instructions.

Following repeated static torque tests, if the reported torque

value is consistently different than the expected value, you can

enter a scale factor for one or both pedals. The scale factor is

stored in the pedal and adjusts the power value that is

calculated on the pedal. The scale factor is sent to the Edge

device and stored on Edge device.

Upgrading Vector S to a Dual Sensor System

You can upgrade your Vector S system to a dual sensor

system.

1Go to http://buy.garmin.com, or contact your Garmin dealer

to purchase the upgrade pedal.

2Remove the existing right pedal.

3Determine the bicycle chain clearance (Determining the

Bicycle Chain Clearance).

4Install the Vector components for the right pedal and pedal

pod (Installing the Pedal Pod and Pedal).

5Pair the Vector system with your Edge device (Paring Vector

with Your Edge 1000).

6Follow the setup and calibrations instructions for your device

(Your First Ride).

7Check for software updates (Updating the Software Using

Vector Updater).

Third-Party Devices

For a list of devices that are compatible with Vector, go to

www.garmin.com/vectorowner.

Appendix 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Vector S Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Vector S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info