Bedienungsanleitung Garmin Venu 2S (Seite 23 von 68) (Englisch)

772762

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Pulse Oximeter

The Venu 2 series device has a wrist-based pulse oximeter to gauge the saturation of oxygen in your blood.

Knowing your oxygen saturation can be valuable in understanding your overall health and help you determine

how your body is adapting to altitude. Your device gauges your blood oxygen level by shining light into the skin

and checking how much light is absorbed. This is referred to as SpO2.

On the device, your pulse oximeter readings appear as an SpO2 percentage. On your Garmin Connect account,

you can view additional details about your pulse oximeter readings, including trends over multiple days

(Changing the Pulse Oximeter Tracking Mode, page 17). For more information on pulse oximeter accuracy, go

to garmin.com/ataccuracy.

Getting Pulse Oximeter Readings

You can manually begin a pulse oximeter reading from the pulse oximeter glance. The accuracy of the pulse

oximeter reading can vary based on your blood flow, the device placement on your wrist, and your stillness.

NOTE: You may need to add the pulse oximeter glance to the glance loop (Customizing the Glances, page 21).

1While you are sitting or inactive, swipe up or down to view the pulse oximeter glance.

2Select the glance to begin the reading.

3Hold the arm wearing the device at heart level while the device reads your blood oxygen saturation.

4Keep still.

The device displays your oxygen saturation as a percentage, and a graph of your pulse oximeter readings

and heart rate values since midnight.

Changing the Pulse Oximeter Tracking Mode

1Hold .

2Select > Wrist Heart Rate > Pulse Ox > Tracking Mode.

3Select an option:

• To turn on measurements while you are inactive during the day, select All Day.

NOTE: Turning on pulse oximeter tracking decreases battery life.

• To turn on continuous measurements while you sleep, select During Sleep.

NOTE: Unusual sleep positions can cause abnormally low sleep-time SpO2 readings.

• To turn off automatic measurements, select Off.

Tips for Erratic Pulse Oximeter Data

If the pulse oximeter data is erratic or does not appear, you can try these tips.

• Remain motionless while the device reads your blood oxygen saturation.

• Wear the device above your wrist bone. The device should be snug but comfortable.

• Hold the arm wearing the device at heart level while the device reads your blood oxygen saturation.

• Use a silicone band.

• Clean and dry your arm before putting on the device.

• Avoid wearing sunscreen, lotion, and insect repellent under the device.

• Avoid scratching the optical sensor on the back of the device.

• Rinse the device with fresh water after each workout.

Activity Tracking

The activity tracking feature records your daily step count, distance traveled, intensity minutes, floors climbed,

calories burned, and sleep statistics for each recorded day. Your calories burned includes your base metabolism

plus activity calories.

The number of steps taken during the day appears on the steps glance. The step count is updated periodically.

For more information about activity tracking and fitness metric accuracy, go to garmin.com/ataccuracy.

Activity Tracking 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Venu 2S Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Venu 2S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info