Bedienungsanleitung Garmin Virb 360 (Seite 5 von 22) (Englisch)

661253

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Introduction

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

It is your responsibility to use the device in a safe manner.

Garmin

will not be responsible for any property damage, injuries

or deaths resulting from any use of this device in any activities.

Camera Controls

POWER

Select to scroll through menus and menu items.

Hold to turn the device on or off.

From the home screen, select to take a photo.

From the home screen, hold to set the photo delay

timer.

From a menu, select to choose a menu item.

WI-FI

Select to scroll through menus and menu items.

Hold to turn the Wi‑Fi

radio on or off.

Recording

switch

Move the switch to start or stop recording video

(Recording a Video, page 4).

Device Overview

Status LEDs (2) Indicate status information about the camera

and features (Status LEDs, page 13).

Front camera lens Captures the front half of the video sphere. By

default, the starting view for 360-degree videos

is centered on this lens.

Rear camera lens Captures the rear half of the video sphere.

Microphones (4) Capture 360-degree spatial audio.

Installing the Battery

WARNING

This product contains a lithium-ion battery. To prevent the

possibility of personal injury or product damage caused by

battery exposure to extreme heat, store the device out of direct

sunlight.

Slide the latch

to open the battery compartment door.

Insert the battery

into the compartment.

Close the battery compartment door, and press it until it

clicks.

Installing a Memory Card

You must install a compatible microSD

memory card to use

your device. You should use a UHS-I microSD card from a

quality manufacturer with a speed class rating of U3 or better

and a storage capacity of up to 128 GB. For more information

about compatible memory cards, go to garmin.com/VIRBcards.

Slide the latch

to open the side door.

Insert the memory card

into the slot, and press it in until it

clicks.

TIP: The memory card label must face down.

Close the door, and press it until it clicks.

Charging the Battery

The status LEDs flash rapidly when the battery charge level is

low. You can charge the battery using a standard wall outlet or a

USB port on your computer. The camera is powered by a

removable lithium-ion battery.

TIP: The optional external battery charger accessory allows you

to charge up to two batteries outside the camera. Go to

garmin.com/virb to purchase the battery charger accessory and

spare batteries.

NOTE: The battery will not charge when outside the approved

charging temperature range (Specifications, page 14).

Turn off the camera.

The camera does not charge the battery while it is turned on.

It is possible to operate the camera using external power, but

the battery charge level does not increase until you turn off

the camera.

Slide the latch

to open the side door.

Introduction 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Virb 360 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Virb 360

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info