Bedienungsanleitung Garmin VIRB X Actioncam (Seite 9 von 16) (Englisch)

629029

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

For the best results, mount the device so it does not move

while recording.

Record a video.

Recording a Video Loop

Loop recording allows you to record video continuously but save

only the most recent video footage. You can select the number

of minutes of video to save. This enables you to save storage

space when you want to capture key moments but do not want

to save all footage of an activity. This feature is useful when

using the device as a driving recorder.

The saved video loop is split into multiple files of equal length.

This allows you to delete unwanted portions of the video easily.

Hold MENU

Select Video >

Loop

Select the number of minutes of video to save.

Start recording video.

When finished, stop recording.

The most recent footage is saved on the memory card, up to the

number of minutes selected in step 3.

Connecting a Cabled External Microphone or

Audio Source

Before you can connect an external microphone, you must

purchase the

VIRB rugged combo cable accessory. Go to

http://virb.garmin.com/products/rugged-combo-cable-virbx-xe.

You must also have an external microphone or audio source

with a 3.5 mm connector.

When you enable and connect an external microphone, the

device records audio from the external microphone instead of

the built-in microphone.

Hold MENU.

Select System

> Microphone > External

to enable the

external microphone.

Align the charger posts on the accessory cable with the

contacts on the side of the device, and press the accessory

cable until it clicks.

Connect the microphone to the MIC IN

connector on the

accessory cable.

To stop using the external microphone, you must disconnect the

accessory cable from the device. You can select

System >

Microphone >

Internal

to enable the built-in microphone.

Live Viewfinder

Outputting Composite Video

Before you can output composite video, you must purchase the

VIRB rugged combo cable accessory. Go to

http://virb.garmin.com/products/rugged-combo-cable-virbx-xe.

You must also have an RCA composite video cable.

You can display composite video on an external display.

Hold

MENU.

Select Video

> Video Out

to enable composite video output.

Align the charger posts on the accessory cable with the

contacts on the side of the device, and press the accessory

cable until it clicks.

Connect an RCA composite video cable to the VID OUT

connector of the accessory cable and to an available port on

your external display.

Photos

Taking a Photo

Your device provides several methods for taking a photo using

the default settings. You can change the photo mode to capture

single, burst, or time lapse photos by holding MENU and

selecting

Photos

> Mode

• While on the home screen or sensor screens, select the

key to take a single photo.

• While on the home screen or sensor screens, hold the key

to take multiple photos in burst-on-demand mode.

The device continues taking photos the entire time you hold

• While recording a video, select the key to capture a photo

at the same resolution as the video recording.

Photos taken while recording a video always use single photo

capture. Photo timelapse or burst settings are ignored while

recording video.

Photo Settings

Hold

MENU, and select Photos.

Mode: Sets the shooting mode

(

Photo Modes

, page

5).

NOTE:

Additional settings vary based on the selected mode.

Start Time: Sets the start time for extended time-lapse mode.

You can start shooting now, or set a custom start time.

Duration: Sets the duration for extended time-lapse mode. You

can shoot continuously, or set a custom duration.

Interval: Sets the time interval for burst mode, time-lapse mode,

and extended time-lapse mode. For time-lapse mode, you

can choose a preset interval or set a custom interval.

Field of View: Sets the zoom level.

Self Timer: Sets the timer to delay taking a photo.

Lens Correct: Corrects wide-angle barrel distortion and reduces

the field of view.

Date Stamp: Adds a date stamp to your photo.

Photo Modes

Hold MENU, and select Photos

> Mode

Single: Enables you to take a single photo using automatic

exposure.

Burst: Enables you to rapidly take three, five, or ten images in

one second. This mode is ideal for capturing photos of

people or objects in motion.

NOTE:

The

VIRB

XE device provides additional burst

intervals.

Timelapse: Enables you to capture a series of photos at set

time intervals.

Ext. Timelapse: Enables you to capture a series of photos over

an extended duration. The VIRB

X/XE device turns off

between image captures, allowing the device to maximize

battery life.

Taking a Delayed Photo

You can delay taking a photo using the self timer. This allows

you to join or adjust a shot before the photo is taken.

Hold .

Select Photos > Self Timer.

Select a delay time.

While on the home screen, select the key.

The countdown timer displays the remaining time until the

photo is taken, in seconds.

Photos 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VIRB X Actioncam Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VIRB X Actioncam

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info