Bedienungsanleitung Garmin VIRB XE Actioncam (Seite 6 von 16) (Englisch)

629028

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Charge the battery completely.

Saving Energy While Charging the Device

You can turn off the device screen and all other features while

charging.

Connect your device to an external power source.

Hold POWER for 4 to 5 seconds.

The screen turns off, and the device goes into a low power,

battery charging mode.

Charge the device completely.

Attaching the Device to the Mount

NOTICE

To prevent product loss or damage, do not use the adhesive

mounting base when the temperature is below -15°C (5°F).

The permanent mounting adhesive is extremely difficult to

remove after it is installed.

Before you can install the adhesive mounting base onto a

surface, the ambient temperature must be from 21° to 38°C

(from 70° to 100°F).

Your device includes an assortment of mounting bases and

arms, which can be used in many configurations. These

instructions provide an example of one possible configuration.

You can also purchase additional mounts for your device, such

as wearable mounts, vehicle mounts, or a tripod mount. Go to

www.garmin.com/VIRB for more information.

NOTE:

By default, the device should be mounted with the

screen facing up to record correctly oriented video. You can

adjust the settings to record with the screen facing down

(

Inverting the Camera Orientation,

page

Thoroughly clean and dry the mounting surface using water

or alcohol.

The mounting surface must be free of dirt, debris, wax, or

coatings.

Remove the film from the adhesive mounting base

, and

press the base firmly onto the mounting surface.

You can use either the flat base or the curved base,

depending on the contour of the mounting surface.

Allow the base to bond to the mounting surface for at least 24

hours.

Insert the adapter

into the base.

The lever

must be in the open position.

Snap the lever to the closed position to lock the adapter into

the base.

The lever should be flush with the base.

Insert the camera mount

into the top of the adapter.

The device should be horizontal for the proper aspect ratio

when recording video.

Insert a thumbscrew

into the larger opening of the joint,

and tighten the thumbscrew to lock the angle of the joint.

NOTE: The metal fitting indicates the smaller opening of the

joint.

If necessary, insert the included hex wrench into the end of

the thumbscrew to adjust the tightness of the joint.

Keys

MENU Select to scroll through sensor status screens,

data screens, and menu items.

Hold to open the menu.

POWER Select to scroll through sensor status screens,

data screens, and menu items.

Hold to turn the device on or off.

OK Select to choose menu options or to take a photo.

Recording

switch

Move the switch to start or stop recording video.

Turning On the Device

Select POWER.

Turning Off the Device

NOTICE

To prevent loss of data, always turn off the device before

removing the battery.

NOTE: You cannot turn off the device while recording video.

If necessary, move the recording switch backward to stop

recording video.

Hold POWER.

The device saves your data and turns off.

If you need to remove the battery, wait until the screen and the

recording light turns off before removing the battery.

Turning the Device On and Off Using the Recording

Switch

You can use the recording switch to turn the device on and off in

recording mode. This feature allows you to start recording

quickly, while automatically turning off the device to conserve

battery power when you are not recording.

NOTE: The device does not turn off using the recording switch

unless you use the recording switch to turn on the device.

With the device turned off, move the recording switch

forward.

The device turns on and starts recording video.

When you are finished recording, move the recording switch

backward.

The device stops recording and turns off.

Home Screen Overview

The home screen provides at-a-glance details about the

remaining memory card space and current settings of your

device.

2 Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VIRB XE Actioncam Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VIRB XE Actioncam

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info