Bedienungsanleitung Garmin Vivohub (Seite 1 von 4) (Englisch)

589582

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

vívohub

™

Instructions

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

Device Overview

The vívohub device is an ANT

to Wi‑Fi

wireless bridge created

to support Garmin

wellness products. Using ANT wireless

protocol, the vívohub device automatically detects and connects

to compatible activity trackers. User data uploads to Garmin

Connected Services over a wireless connection automatically.

User data is available for review on Garmin Connect

™

or through

your wellness partner (if applicable). The vívohub device is

installed as a wireless client on an existing wireless network.

Red LED

Green LED

Micro-USB port

Status LEDs

LED State Description

Green

Double blink (normal

operating mode)

The device has power.

Off The device does not have power.

Red

Off (normal

operating mode)

The device has joined an existing

wireless network and is ready to sync with

compatible activity trackers.

Solid The device is initializing.

Fast blink The device is searching for a network

connection.

vívohub Specifications

Network connectivity Wi‑Fi wireless technology only (no models with

RJ-45)

USB connector type USB 2.0 Micro-B

Power type 4.7 to 6.4 V USB (500 mA max. current)

Ethernet to USB converter when using

switchport Power over Ethernet (POE) (if

desired)

Wi‑Fi radio protocol IEEE 802.11 b/g/n compatible

11 Mbps maximum data rate

Wi‑Fi RF output

(typical)

9 dBm internal power amplifier

ANT radio frequency

band

2.4 GHz ISM (from 2.40000 to 2.4835 GHz)

ANT wireless communications protocol

Maximum ANT radio

data rate

20 Kbps

Operating temperature

range

From -10° to 50°C (from 14° to 122°F) (indoor

use only)

Dimensions W × H × D: 6.7 x 4.0 x 1.5 mm (2.7 x 1.6 x

0.7 in.)

Security WPA-PSK and WPA2-PSK (TKIP/AES)

Installing and Maintaining the Device

How is the device monitored?

• Monitor the device using Garmin Connected Services.

NOTE: Monitoring via SNMP is not supported.

• Visually inspect the status LEDs to determine the power and

connection status of the device (Status LEDs).

How is the device configured?

The vívohub configuration utility sets up connectivity to Garmin

Connected Services and configures the device to join a wireless

network.

Download and install the vívohub configuration utility on your

computer (Configuring Network Settings).

NOTE: The configuration utility is supported only on

Windows

operating systems.

Connect the device to the computer using the micro-USB

connector.

Follow the on-screen instructions to configure the device.

How is the device updated?

The Garmin vívohub firmware loader is used to update the

device when a firmware update is available (Updating Firmware

and Verifying Firmware Version).

How does the device communicate and what can be

done to ensure connectivity?

The device sends data to Garmin Connected Services using

HTTPS over port 443. Garmin Connected Services does not

initiate communication to vívohub devices. The device also

synchronizes time to your selected network time server using

SNTP (Simple Network Time Protocol) over UDP (User

Datagram Protocol) on port 123. An SNTP time server

hostname or IP address must be provided during configuration

in order for the device to operate. For more information, see

Network Settings.

Allow the vívohub device to access the Internet.

If necessary, make a firewall, captive portal, or Internet proxy

exception to allow the device to communicate with Garmin

Connected Services and your selected time server.

You must make exempt gcsgateway.garmin.com:443 (TCP,

Transmission Control Protocol) to enable communications

with Garmin Connected Services. If an external SNTP time

server is used, you must make an exception to access the

selected time server using UDP on port 123.

Where should the device be installed?

The device placement depends on the number of devices being

used, the size of your facility, the employee movement and

location patterns, and the frequency of data collection. For more

information, see Installation Considerations.

• Install the devices in common areas.

TIP: In some facilities, you can install a device in a single

common corridor. In other facilities, you should install multiple

devices to accommodate employee needs.

• Install each device on a wall or ceiling.

February 2015

Printed in Taiwan 190-01735-02_0D

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Vivohub Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Vivohub

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info