Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (Seite 25 von 74) (Englisch)

691428

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

If you selected OK, the chartplotter sets a direct course back to

the location. If you selected another type of SOS, the call details

are sent to the VHF radio. You must send the call using the

radio.

Projecting a Waypoint

You can create a new waypoint by projecting the distance and

bearing from a different location. This can be helpful when

creating sail racing start and finish lines.

Select Waypoints > New Waypoint > Enter Range/

Bearing.

if necessary, select a reference point on the chart.

Select Enter Range/Bearing.

Enter the distance, and select Done.

Enter the bearing, and select Done.

Select Create Waypoint.

Viewing a List of all Waypoints

Select Info > User Data > Waypoints.

Editing a Saved Waypoint

Select Info > User Data > Waypoints.

Select a waypoint.

Select Review > Edit.

Select an option:

• To add a name, select Name, and enter a name.

• To change the symbol, select Symbol.

• To change the depth, select Depth.

• To change the water temperature, select Water Temp..

• To change the comment, select Comment.

• To move the position of the waypoint, select Position.

Moving a Saved Waypoint

Select Waypoints.

Select a waypoint.

Select Review > Move.

Indicate a new location for the waypoint:

• To move the waypoint while using the chart, select Use

Chart, select a new location on the chart, and select

Move.

• To move the waypoint using coordinates, select Enter

Coordinates, and enter the new coordinates.

• To move the waypoint using a range (distance) and

bearing, select Enter Range/Bearing, and enter the

information.

Browsing for and Navigating to a Saved Waypoint

WARNING

All route and navigation lines displayed on the chartplotter are

only intended to provide general route guidance or to identify

proper channels, and are not intended to be precisely followed.

Always defer to the navaids and conditions on the water when

navigating to avoid groundings or hazards that could result in

vessel damage, personal injury, or death.

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: Auto Guidance is available with premium charts, in some

areas.

Before you can navigate to a waypoint, you must create a

waypoint.

Select Info > User Data > Waypoints.

Select a waypoint.

Select Navigate To.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To.

• To use Auto Guidance, select Auto Guidance.

Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Deleting a Waypoint or an MOB

Select Info > User Data > Waypoints.

Select a waypoint or an MOB.

Select Review > Delete.

Deleting All Waypoints

Select Info > User Data > Delete User Data > Waypoints >

All.

Routes

A route is a path from one location to one or more destinations.

Creating and Navigating a Route From Your Present

Location

You can create and immediately navigate a route on the

Navigation chart or the Fishing chart. This method does not

save the route or the waypoint data.

From the Navigation chart or Fishing chart, select a

destination.

Select Navigate To > Route To.

Select the location of the last turn before the destination.

Select Add Turn.

If necessary, repeat to add turns, working backward from the

destination to the present location of your vessel.

The last turn you add should be the first turn you make,

starting from your present location. It should be the turn

closest to your vessel.

If necessary, select Menu.

Select Done.

Review the course indicated by the magenta line.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Creating and Saving a Route

This procedure saves the route and all the waypoints in it. The

starting point can be your present location or another location.

You can add up to 250 waypoints, or turns, to one route.

Select Info > User Data > Routes & Auto Guidance Paths

> New > Route Using Chart.

Select the starting location of the route.

Select Add Turn.

Select the location of the next turn on the chart.

Select Add Turn.

Navigation with a Chartplotter 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info