Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (Seite 51 von 74) (Englisch)

691428

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

From an applicable gauges screen, select Menu > Set

Gauge Limits.

Select a gauge to customize.

Select an option:

• To set the minimum value of the standard operating

range, select Rated Min..

• To set the maximum value of the standard operating

range, select Rated Max..

• To set the lower limit of the gauge lower than the rated

minimum, select Scale Min..

• To set the upper limit of the gauge higher than the rated

maximum, select Scale Max..

Select the limit value.

Repeat steps 4 and 5 to set additional gauge limits.

Configuring the Tank Level Sensors

NOTICE

You must connect fuel sensors to inputs 1, 2, 3, or 4.

Select Settings > My Vessel > Seven Marine Installation >

Tank Preset.

Select a tank level sensor to configure.

Select Name, enter a name, and select Done.

Select Type, and select the type of sensor.

Select Style, and select the style of sensor.

Select Tank Capacity, enter the capacity of the tank, and

select Done.

Select Calibration, and follow the on-screen instructions to

calibrate the tank levels.

If you do not calibrate the tank levels, the system uses

default settings for the tank levels.

Setting the Fuel Alarm

You can set an alarm to sound when the total amount of

remaining onboard fuel reaches the level you specify.

Select Settings > Alarms > Fuel.

If necessary, select a driveline.

Select On.

Enter the remaining amount of fuel that triggers the alarm.

If necessary, repeat steps 2–4 for all drivelines.

Viewing Graphs

Before you can view graphs of various environmental changes,

such as temperature, depth, and wind, you must have an

appropriate transducer or sensor connected to the network.

Select Info > Graphs.

Select a graph.

Setting the Graph Range and Time Scales

You can indicate the amount of time and the range of depth that

appear in the depth and water temperature graphs.

From a graph, select Graph Setup.

Select an option:

• To set a time-elapsed scale, select Duration. The default

setting is 10 minutes. Increasing the time-elapsed scale

allows you to view variations over a longer period of time.

Decreasing the time-elapsed scale allows you to view

more detail over a shorter period of time.

• To set the graph scale, select Scale. Increasing the scale

allows you to view more variation in readings. Decreasing

the scale allows you to view more detail in the variation.

Adjusting the Active Trim

Active trim controls the amount of pitch and roll of your boat.

Pitch is the forward and backward motion of your boat on its

center axis, relative to the surface of the water. Roll is the

side-to-side motion of your boat on its center axis. You can

adjust the active trim to limit the amount of degrees your pitch

and roll are from your desired trim levels.

Select OneHelm™, A/V, Gauges > Active Trim.

Select an option:

• To adjust the forward and backward motion, select Active

Pitch.

• To adjust the side-to-side motion, select Active Roll.

Adjusting the Active Trim Sensitivity

You can adjust the active trim sensitivity to limit the amount of

degrees your pitch and roll are from your desired trim levels.

Select OneHelm™, A/V, Gauges > Active Trim > Menu >

Active Sensitivity.

Adjust the level of sensitivity.

Viewing Graphs

Before you can view graphs of various environmental changes,

such as temperature, depth, and wind, you must have an

appropriate transducer or sensor connected to the network.

Select Info > Trip & Graphs > Graphs.

Setting the Graph Range and Time Scales

You can indicate the amount of time and the range of depth that

appear in the depth and water temperature graphs.

From a graph, select Graph Setup.

Select an option:

• To set a time-elapsed scale, select Duration. The default

setting is 10 minutes. Increasing the time-elapsed scale

allows you to view variations over a longer period of time.

Decreasing the time-elapsed scale allows you to view

more detail over a shorter period of time.

• To set the graph scale, select Scale. Increasing the scale

allows you to view more variation in readings. Decreasing

the scale allows you to view more detail in the variation.

Vessel Information

When the chartplotter is connected to a compatible EVC 2.0

Volvo Penta engine, you can view information about the engine.

Select Info > Vessel Info.

Maintenance Assistant

When the chartplotter is connected to a compatible Volvo Penta

engine, you can view the time to the next engine service, in

engine hours remaining and days remaining.

Select Info > Vessel Info > Maintenance Assistant.

After you have serviced the engine, select the engine, and

select Reset Service Reminder.

Oil Level Information

When the chartplotter is connected to a compatible Volvo Penta

engine and an engine oil level sensor or a transmission oil level

sensor, you can view information about the engine oil level and

transmission oil level.

Vessel Information 43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info