Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (Seite 54 von 74) (Englisch)

691428

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

NOTE: A FUSION PartyBus zone stereo, such as the Apollo

™

SRX400 zone stereo, cannot stream sources to other FUSION

PartyBus devices on the network. Because of this, zone stereos

do not appear as available sources in the chartplotter.

From the media screen, select Source.

NOTE: After few moments, the compatible FUSION PartyBus

stereos appear as sources.

Select the FUSION PartyBus stereo.

If necessary, select Source, and select a different source

connected to the FUSION PartyBus stereo.

To leave the FUSION PartyBus network, you can select Source

> Leave PartyBus.

Adjusting the Volume

Muting the Media Volume

From the media screen, select .

If necessary, select Select.

Enabling and Disabling Zones

If you have wired your vessel's speakers into zones, you can

enable needed zones and disable unused zones.

From the media screen, select Menu > Audio Levels >

Enable/Disable Zones.

Select a zone.

VHF Radio

NOTE: These features are available on some stereos with a

VHF receiver.

Scanning VHF Channels

Before you can scan VHF channels, you must set the source to

VHF.

You can monitor VHF channels saved as presets for activity and

automatically switch to an active channel.

From the VHF media screen, select Scan.

Adjusting the VHF Squelch

NOTE: This feature is available on some stereos with a VHF

receiver.

From the VHF source page, select Menu > Squelch.

Use the slider bar to adjust the VHF squelch.

Radio

To listen to AM or FM radio, you must have a suitable marine

AM/FM antenna properly connected to the stereo and be within

range of a broadcasting station. For instructions on connecting

an AM/FM antenna, see the stereo installation instructions.

To listen to SiriusXM

radio, you must have the appropriate

equipment and subscriptions (SiriusXM Satellite Radio,

page 47). For instructions on connecting a SiriusXM Connect

Vehicle Tuner, see the stereo installation instructions.

To listen to DAB stations, you must have the appropriate

equipment (DAB Playback, page 46). For instructions on

connecting a DAB adapter and antenna, see the installation

instructions provided with your adapter and antenna.

Setting the Tuner Region

From the media screen, select Menu > Installation > Tuner

Region.

Select an option.

Changing the Radio Station

From the media screen, select an applicable source, such as

FM.

Select or to tune to a station.

Changing the Tuning Mode

You can change how you select a station for some media types,

such as FM or AM radio.

NOTE: Not all tuning modes are available for all media sources.

From the media screen, select Menu > Tuning Mode.

Select an option.

If necessary, select Select.

Presets

You can save your favorite AM stations and FM stations as

presets for easy access.

You can save your favorite SiriusXM channels if you are

connected to an optional SiriusXM tuner and antenna.

You can save your favorite DAB stations if you are connected to

an optional DAB antenna.

Saving a Station as a Preset

From an applicable media screen, tune to the station to save

as a preset.

Select Presets > Add Current Channel.

Selecting a Preset

From an applicable media screen, select Presets.

Select a preset from the list.

Select Tune to Channel.

Removing a Preset

From an applicable media screen, select Presets.

Select a preset from the list.

Select Remove Current Channel.

DAB Playback

When you connect a compatible Digital Audio Broadcasting

(DAB) module and antenna, such as the FUSION

MS-

DAB100A to a compatible stereo, you can tune in to and play

DAB stations

To use the DAB source, you must be in a region in which DAB is

available, and select the tuner region (Setting the DAB Tuner

Region, page 46).

Setting the DAB Tuner Region

You must select the region you are in to receive DAB stations

properly.

From the media screen, select Menu > Installation > Tuner

Region.

Select the region you are in.

Scanning for DAB Stations

Before you can scan for DAB stations, you must connect a

compatible DAB module and antenna (not included) to the

stereo. Because DAB signals are broadcast in select countries

only, you must also set the tuner region to a location where DAB

signals are broadcast.

Select the DAB source.

Select Scan to scan for available DAB stations.

When scanning is complete, the first available station in the

first ensemble found begins playing.

NOTE: After the first scan is complete, you can select Scan

again to re-scan for DAB stations. When the re-scan is

complete, the system starts playing the first station in the

ensemble you were listening to when you started the re-scan.

Changing DAB Stations

Select the DAB source.

If necessary, select Scan to scan for local DAB stations.

Select or to change the station.

46 Media Player

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info