Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (Seite 68 von 74) (Englisch)

691428

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

A Garmin folder containing the software update is created in

the selected location. A dialog box opens to assist in

transferring the software update to a memory card.

Select Next.

Select the drive associated with the memory card, and select

Next > Finish.

A Garmin folder containing the software update is created on the

memory card. The software update can take several minutes to

load onto the memory card.

Updating the Device Software

Before you can update the software, you must obtain a

software-update memory card or load the latest software onto a

memory card (Loading the New Software on a Memory Card,

page 59).

Turn on the chartplotter.

After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process

completes.

When prompted, leave the memory card in place and restart

the chartplotter manually.

Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

Pairing the GRID Device with the

Chartplotter from the Chartplotter

NOTE: These steps are applicable to both the GRID device and

the GRID 20 device.

Before you can pair the GRID 20 device with the chartplotter to

make the data connection, you must supply power using

batteries, the included power cable, or a NMEA 2000 network

connection.

Before you can pair the GRID device with the chartplotter, you

must connect it to the Garmin Marine Network.

Select Settings > System > Station Information > GRID™

Pairing > Add.

Select an action:

• On the GRID remote input device, press SELECT.

• On the GRID 20 remote input device, press and until

the remote control beeps three times.

Pairing the GRID Device with the Chartplotter from

the GRID Device

NOTE: This is not applicable to the GRID 20 device.

On the GRID remote input device, press + and HOME at the

same time.

A selection page opens on all of the chartplotters on the

Garmin Marine Network.

Rotate the wheel on the GRID remote input device to

highlight Select on the chartplotter you want to control with

the GRID remote input device.

Press SELECT.

Rotating the GRID Remote Input Device

For certain installation situations, you can rotate the orientation

of the GRID device.

NOTE: This is not applicable to the GRID 20 device.

Select Settings > Communications > Marine Network.

Select the GRID device.

Cleaning the Screen

NOTICE

Cleaners containing ammonia will harm the anti-reflective

coating.

The device is coated with a special anti-reflective coating which

is very sensitive to waxes and abrasive cleaners.

Apply an eyeglass lens cleaner specified as safe for anti-

reflective coatings to the cloth.

Gently wipe the screen with a soft, clean, lint-free cloth.

Viewing Images on a Memory card

You can view images that are saved on a memory card. You

can view .jpg, .png, and .bmp files.

Insert a memory card with image files into the card slot.

Select Info > Image Viewer.

Select the folder containing the images.

Wait a few seconds for the thumbnail images to load.

Select an image.

Use the arrows to scroll through the images.

If necessary, select Menu > Start Slideshow.

Screenshots

You can capture a screenshot of any screen shown on your

chartplotter as a .png file. You can transfer the screenshot to

your computer. You can also view the screenshot in the image

viewer (Viewing Images on a Memory card, page 60).

Capturing Screenshots

Insert a memory card into the card slot.

Select Settings > Preferences > Screenshot Capture >

On.

Go to a screen you want to capture.

Hold Home for at least six seconds.

Copying Screenshots to a Computer

Remove the memory card from the chartplotter, and insert it

into a card reader that is attached to a computer.

From Windows Explorer, open the Garmin\scrn folder on the

memory card.

Copy a .bmp file from the card and paste it to any location on

the computer.

Troubleshooting

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be a

few causes. If the device has moved a large distance since the

last time it has acquired satellites or has been turned off for

longer than a few weeks or months, the device may not be able

to acquire the satellites correctly.

• Ensure the device is using the latest software. If not, update

the device software.

• Make sure the device has a clear view of the sky so the

antenna can receive the GPS signal. If it is mounted inside of

a cabin, it should be close to a window so it can receive the

GPS signal.

My device will not turn on or keeps turning off

Devices erratically turning off or not turning on could indicate an

issue with the power supplied to the device. Check these items

to attempt to troubleshoot the cause of the power issue.

• Make sure the power source is generating power.

60 Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info