Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7400 (Seite 15 von 76) (Englisch)

691432

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Pairing the Wireless Remote Control With the

Chartplotter

Before you can use the wireless remote control with a

chartplotter, you must pair the remote with the chartplotter.

You can connect a single remote to multiple plotters, and then

press the pairing key to switch between the chartplotters.

Select Settings > Communications > Wireless Devices >

Wireless Remotes > GPSMAP® Remote.

Select New Connection.

Follow the on-screen instructions.

Turning On and Off the Remote Backlight

Turning off the remote backlight can significantly increase the

battery life.

On the chartplotter, select Settings > Communications >

Wireless Devices > Wireless Remotes > GPSMAP®

Remote > Backlight.

Follow the on-screen instructions.

Disconnecting the Remote from All Chartplotters

On the chartplotter, select Settings > Communications >

Wireless Devices > Wireless Remotes > GPSMAP®

Remote > Disconnect All.

Follow the on-screen instructions.

Wireless Wind Sensor

Connecting a Wireless Sensor to the Chartplotter

You can view data from a compatible wireless sensor on the

chartplotter.

Select Settings > Communications > Wireless Devices.

Select the wind sensor.

Select Enable.

The chartplotter begins searching for and connecting to the

wireless sensor.

To view data from the sensor, add the data to a data field or

gauge.

Adjusting the Wind Sensor Orientation

You should adjust this setting if the sensor does not face the

front of the boat, exactly parallel to the center line.

NOTE: The opening where the cable connects to the pole

indicates the front of the sensor.

Estimate the angle, in degrees clockwise around the mast, by

which the sensor points away from the center of the front of

the boat:

• If the sensor is facing starboard, the angle should be

between 1 and 180 degrees.

• If the sensor is facing port, the angle should be between

-1 and -180 degrees.

Select Settings > Communications > Wireless Devices.

Select the wind sensor.

Select Wind Angle Offset.

Enter the angle observed in step 1.

Select Done.

Viewing Boat Data on a Garmin Watch

You can connect a compatible Garmin watch to a compatible

chartplotter to view data from the chartplotter.

Bring the Garmin watch within range (3 m) of the chartplotter.

From the watch clock screen, select START > Boat Data >

START.

NOTE: If you have already connected to a chartplotter, and

would like to connect to a different chartplotter, open the Boat

Data screen, hold UP, and select Pair new.

On the chartplotter, select Communications > Wireless

Devices > Connect IQ™ Apps > Boat Data > Enable >

New Connection.

The chartplotter begins searching for and connecting to the

wearable device.

After the devices are paired, they connect automatically when

they are turned on and within range.

Viewing Boat Data on a Garmin Nautix

™

Device

You can connect a Garmin Nautix device to the chartplotter to

view charplotter data on the Garmin Nautix device.

NOTE: You can connect a Garmin Nautix device to multiple

compatible devices for better coverage on larger vessels.

Bring the a Garmin Nautix device within range (3 m) of the

chartplotter.

The device automatically looks for all compatible devices

within range.

If necessary, from the wearable device menu, select Device

Connections > Pair New Device.

On the chartplotter, select Settings > Communications >

Wireless Devices > Connect IQ™ Apps > Boat Data >

Enable Connections > New Connection.

The chartplotter begins searching for and connecting to the

wearable device.

After the devices are paired, they connect automatically when

they are turned on and within range.

Charts and 3D Chart Views

The charts and 3D chart views that are available depend on the

map data and accessories used.

NOTE: 3D chart views are available with premium charts, in

some areas.

You can access the charts and 3D chart views by selecting

Charts.

Nav. Chart: Shows navigation data available on your pre-loaded

maps and from supplemental maps, if available. The data

includes buoys, lights, cables, depth soundings, marinas, and

tide stations in an overhead view.

Fishing Chart: Provides a detailed view of the bottom contours

and depth soundings on the chart. This chart removes

navigational data from the chart, provides detailed

bathymetric data, and enhances bottom contours for depth

recognition. This chart is best for offshore deep-sea fishing.

NOTE: The Fishing chart is available with premium charts, in

some areas.

Perspective 3D: Provides a view from above and behind the

boat (according to your course) and provides a visual

navigation aid. This view is helpful when navigating tricky

shoals, reefs, bridges, or channels, and is beneficial when

trying to identify entry and exit routes in unfamiliar harbors or

anchorages.

3D Chart: Shows a detailed, three-dimensional view from above

and behind the boat (according to your course) and provides

a visual navigation aid. This view is helpful when navigating

tricky shoals, reefs, bridges, or channels, and when trying to

identify entry and exit routes in unfamiliar harbors or

anchorages.

Fish Eye 3D: Provides an underwater view that visually

represents the sea floor according to the chart information.

When a sonar transducer is connected, suspended targets

Charts and 3D Chart Views 7

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7400 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info