Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 (Seite 21 von 76) (Englisch)

691433

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Water Layer Settings

From a chart, select Menu > Layers > Water.

NOTE: The menu may contain some settings that are not

supported by your installed charts or your present location. If

you make changes to those settings, the changes will not impact

the chart view.

Depth Shading: Specifies an upper and lower depth to shade

between.

Shallow Shading: Sets the shades from the shoreline to the

specified depth.

Spot Depths: Turns on spot soundings and sets a dangerous

depth. Spot depths that are equal to or more shallow than the

dangerous depth are indicated by red text.

Fishing Contours: Sets the zoom level for a detailed view of

bottom contours and depth soundings and simplifies map

presentation for optimal use while fishing.

Relief Shading: Shows the gradient of the bottom with shading.

This feature is available only with some premium maps.

Sonar Imagery: Shows sonar imagery to help show the density

of the bottom. This feature is available only with some

premium maps.

Lake Level: Sets the present water level of the lake. This

feature is available only with some premium maps.

Depth Range Shading

You can set color ranges on your map to show the water depths

where your target fish are currently biting. You can set deeper

ranges to monitor how quickly the bottom depth changes within

a specific depth range. You can create up to ten depth ranges.

For inland fishing, a maximum of five depth ranges can help

reduce map clutter. The depth ranges apply to all charts and all

bodies of water.

Some Garmin LakeVü

™

and premium supplemental charts have

multiple depth range shading by default.

Red From 0 to 1.5 m (from 0 to 5 ft.)

Orange From 1.5 to 3 m (from 5 to 10 ft.)

Yellow From 3 to 4.5 m (from 10 to 15 ft.)

Green From 4.5 to 7.6 m (from 15 to 25 ft.)

Weather Layer Settings

From the Navigation or Fishing chart, select Menu > Layers >

Chart > Weather > .

From a weather chart, select Menu > Layers > Chart >

Weather.

Observed Layers: Sets which observed weather items are

shown. Observed weather is the present weather condition

that are visible now.

Forecast Layers: Sets which forecasted weather items are

shown.

Layer Mode: Shows forecasted or observed weather

information.

Loop: Shows a loop of forecasted or observed weather

information.

Legend: Shows the weather legend, with the severity of the

conditions increasing from left to right.

Weather Subscription: Shows weather subscription

information.

Restore Defaults: Resets the weather settings to factory default

values.

Edit Overlays: Adjusts the data shown on the screen

(Customizing the Data Overlays, page 3).

Radar Overlay Settings

From the Navigation or Fishing chart, select Menu > Layers >

Radar > .

From a radar screen, select Menu.

Radar To Standby: Stops radar transmission.

Gain: Adjusts the gain (Adjusting Gain on the Radar Screen

Automatically, page 35).

Sea Clutter: Adjusts the sea clutter (Adjusting Gain on the

Radar Screen Automatically, page 35).

Radar Options: Opens the radar options menu (Radar Options

Menu, page 36).

Other Vessels: Sets how other vessels are displayed on the

radar view (Other Vessels Layer Settings, page 12).

Radar Setup: Opens the radar display settings (Radar Setup

Menu, page 36).

Edit Overlays: Adjusts the data shown on the screen

(Customizing the Data Overlays, page 3).

Chart Settings

NOTE: Not all settings apply to all charts and 3D chart views.

Some settings require external accessories or applicable

premium charts.

From a chart, select Menu > Settings.

Orientation: Sets the perspective of the map.

Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Chart Size: Sets the visible size of the chart.

World Map: Uses either a basic world map or a shaded relief

map on the chart. These differences are visible only when

zoomed out too far to see the detailed charts.

Start Line: Sets the starting line for the sailing raceSetting the

Starting Line, page 21.

Inset Map: Shows a small map centered on your present

location.

Fish Eye 3D Settings

NOTE: This feature is available with premium charts, in some

areas.

From the Fish Eye 3D chart view, select Menu.

View: Sets the perspective of the 3D chart view.

Tracks: Shows tracks.

Sonar Cone: Shows a cone that indicates the area covered by

the transducer.

Fish Symbols: Shows suspended targets.

Supported Maps

To help you have a safe and enjoyable time on the water,

Garmin devices only support official maps produced by Garmin

or an approved third party producer.

You can purchase maps from Garmin. If you purchase maps

from a seller other than Garmin, investigate the seller before

purchasing. Be extra cautious with online sellers. If you have

purchased an unsupported map, return it to the seller.

Charts and 3D Chart Views 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info