Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 (Seite 52 von 76) (Englisch)

691433

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Select Info > Vessel Info > Oil Level.

Driveline Information

When the chartplotter is connected to a compatible Volvo Penta

engine, you can view information about the engine type,

driveline count, drive type, engine rate, electrical system, and

EVC generation.

Select Info > Vessel Info > Driveline Info.

EVC Network Information

When the chartplotter is connected to a compatible Volvo Penta

engine, you can view information about the EVC network, such

as features, components, software versions, and calibration.

Select Info > Vessel Info > EVC Network.

inReach

Messages

WARNING

Do not read or reply to notifications while operating the vessel.

Failure to pay attention to the conditions on the water can result

in vessel damage, personal injury, or death.

You can connect an inReach Mini device to the chartplotter to

view, reply to, and send preset messages from the chartplotter.

NOTE: The inReach Mini device must be connected to the

chartplotter and receiving satellite signals to send and receive

messages using the chartplotter.

To open the InReach® page, select A/V, Gauges, Controls >

InReach®.

Connecting an inReach Device to the

Chartplotter

You can connect a compatible inReach device to the chartplotter

to manage messages.

Bring the inReach device within 3 m (10 ft.) of the

chartplotter.

From the main menu of the inReach device, select Setup >

ANT+ > Status > On.

On the chartplotter, select A/V, Gauges, Controls >

InReach® > Start Pairing.

The chartplotter begins searching for and connecting to the

inReach device. This can take up to 60 seconds.

If necessary, compare the code on the inReach device to the

chartplotter, and select OK if they match.

The inReach and chartplotter connect automatically when they

are within range.

Receiving inReach Messages

When your inReach device receives a message, a pop-up

notification appears briefly on the GLASS COCKPIT screen.

• To review the full message, select Review.

• To dismiss the pop-up notification, select OK or wait for the

notification to close automatically.

Sending an inReach Preset Message

Preset messages are messages that you created at

explore.garmin.com. Preset messages have predefined text and

recipients.

From the InReach® page, select Messages > Send

inReach Preset.

Select a preset message.

Select Send.

Replying to an inReach Message

You can reply to an inReach message with a pre-written

message.

From the InReach® page, select Messages.

A list of sent and received messages appears.

Select a received message.

Select Reply.

Select a message.

Select Send.

Digital Switching

Your chartplotter can be used to monitor and control circuits

when a compatible system is connected.

For example, you can control the interior lights and navigation

lights on the vessel. You can also monitor live well circuits.

To access the digital switching controls, select A/V, Gauges,

Controls > Switching.

For more information about purchasing and configuring a digital

switching system, contact your Garmin dealer.

Adding and Editing a Digital Switching Page

You can add and customize digital switching pages to the

chartplotter.

Select A/V, Gauges, Controls > Switching > Menu >

Setup.

Select Add Page or Edit Page.

Set up the page as needed:

• To enter a name for the page, select Name.

• To set up the switches, select Edit Switches.

• To add an image of the boat, select Add BoatView

Image.

NOTE: You can load an image of your vessel into the

device to use for the image, or use a default image. You

can also adjust the view and placement of the image.

Tide, Current, and Celestial

Information

Tide Station Information

You can view information about a tide station for a specific date

and time, including the tide height, and when the next high and

low tides will occur. By default, the chartplotter shows tide

information for the most recently viewed tide station, present

date, and past hour.

Select Info > Tides & Currents > Tides.

Current Station Information

NOTE: Current station information is available with certain

detailed maps.

You can view information about a current station for a specific

date and time, including the current speed and level of the

current. By default, the chartplotter shows current information for

the most recently viewed current station and for the present date

and time.

Select Info > Tides & Currents > Currents.

Celestial Information

You can view information about sunrise, sunset, moonrise,

moonset, moon phase, and the approximate sky view location of

the sun and moon. The center of the screen represents the sky

overhead, and the outermost rings represent the horizon. By

44 inReach

Messages

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info