Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 (Seite 58 von 76) (Englisch)

691433

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

screen. Variations in the visibility shading show the forecast

change in surface visibility.

NOTE: This feature is not available on all devices and in all

subscriptions.

Select Charts > Visibility.

Viewing Forecast Visibility Information for Another

Time Period

Select Charts > Visibility.

Select an option:

• To view the visibility forecast for the next 36 hours, in 12-

hour increments, select multiple times.

• To view the visibility forecast for the previous 36 hours, in

12-hour increments, select multiple times.

Viewing Buoy Reports

Report readings are taken from buoys and coastal observation

stations. These readings are used to determine air temperature,

dew point, water temperature, tide, wave height and period,

wind direction and speed, visibility, and barometric pressure.

From a weather chart, select .

Select Buoy.

Viewing Local Weather Information near a Buoy

You can select an area near a buoy to view forecast information.

From a weather chart, select a location on the chart.

Select Local Weather.

Select an option:

• To view present weather conditions from a local weather

service, select Current Condition.

• To view a local weather forecast, select Forecast.

• To view surface wind and barometric pressure information,

select Sea Surface.

• To view wind and wave information, select Marine

Bulletin.

Weather Overlay

The weather overlay superimposes weather and weather-related

information on the Navigation chart, the Fishing chart, and the

Perspective 3D chart view. The Navigation chart and the Fishing

chart can show weather radar, height of cloud tops, lightning,

weather buoys, county warnings, and hurricane warnings. The

Perspective 3D chart view can show weather radar.

Weather overlay settings configured for use on one chart are not

applied to another chart. The weather overlay settings for each

chart must be configured separately.

NOTE: The Fishing chart is available with premium charts, in

some areas.

Viewing Weather Subscription Information

You can view information about the weather services you have

subscribed to and how many minutes have passed since the

data for each service was updated.

From a weather chart, select Menu > Subscription.

Viewing Video

WARNING

Do not view video or photos while operating the vessel. Failure

to pay attention to the conditions on the water can result in

vessel damage, personal injury, or death.

Before you can view video, you must connect to a compatible

source.

Compatible devices include video devices connected to the

ports on the chartplotter or to the Garmin Marine Network, as

well as supported network (IP-based) video cameras, encoders,

and thermal cameras.

Select A/V, Gauges, Controls > Video.

Selecting a Video Source

From the video screen, select Menu > Source.

Select the source of the video feed.

Alternating Among Multiple Video Sources

If you have two or more video sources, you can alternate

between them using a specific time interval.

From the video screen, select Menu > Source > Alternate.

Select Time, and select the amount of time each video

appears.

Select Source, and select the video sources to add to the

alternating sequence.

Networked Video Devices

NOTICE

A Garmin Power over Ethernet (PoE) Isolation Coupler (P/N

010-10580-10) must be used when connecting a PoE device,

such as a FLIR

camera, to a Garmin Marine Network.

Connecting a PoE device directly to a Garmin Marine Network

chartplotter damages the Garmin chartplotter and may damage

the PoE device.

Before you can view and control video devices such as IP

cameras, encoders, and thermal cameras using your

chartplotter, you must have a compatible video device

connected to your chartplotter, and you must have a marine

network cable Power over Ethernet (PoE) isolation coupler. Go

to garmin.com for a list of compatible devices or to purchase a

PoE Isolation Coupler.

You can connect multiple supported video cameras and up to

two video encoders to the Garmin Marine Network. You can

select and view up to four video sources at once. Chartplotters

with multiple composite built-in video inputs can display a single

built-in video input only. When the cameras are connected, the

network detects them automatically and displays them in the

source list.

Using Video Presets on Networked Video Cameras

You can save, name, and activate video presets for each

networked video source.

Saving Video Presets on a Networked Video Camera

From a video screen, touch the screen.

The video controls appear on the screen.

Hold a video preset button.

A green light indicates the setting is stored.

Naming Video Presets on a Networked Video Camera

From a video screen, select Menu > Video Setup > Presets.

Select a preset.

Select Rename.

Enter preset name.

Activating Video Presets on a Networked Video Camera

You can quickly return networked cameras to preset values.

From a video screen, touch the screen.

The video controls appear on the screen.

Select a video preset.

The camera restores the video settings saved for that preset.

TIP: You can also save and activate presets using the video

menu.

50 Viewing Video

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info