Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 (Seite 61 von 76) (Englisch)

691433

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Video FPS: Sets the frames per second.

Video Timestamp: Adds the date and time a video was

recorded.

Photo Timestamp: Adds the date and time a photo was taken.

Photo Size: Sets the size or pixel dimensions of photos.

Field of View: Sets the zoom level.

Lens Mode: Sets which lens or lenses the camera uses while

shooting video.

Mirror: Allows you to flip or mirror the video.

Rotation: Allows you to rotate the camera angle.

Adding the VIRB Action Camera Controls to Other

Screens

Before you can control a VIRB action camera with the

chartplotter, you must connect the devices using a wireless

connection (Connecting a Wireless Device to the Chartplotter,

page 6).

You can add the VIRB action camera control bar to other

screens. This allows you to start and stop recording from other

functions in the chartplotter.

Open the screen to which you want to add the VIRB action

camera control bar.

Select Menu > Edit Overlays > Bottom Bar > VIRB Bar.

When viewing a screen that has the VIRB action camera

controls, you can select to open the full screen view of the

VIRB action camera.

Pairing the GC

™

100 Camera with a Garmin

Chartplotter

Before you can connect a wireless device to the chartplotter

wireless network, you must configure the chartplotter wireless

network.

With the camera within an unobstructed 76 m (250 ft.) of the

chartplotter, quickly press three times.

On the chartplotter, select Settings > Communications >

Wireless Devices > Garmin Camera > Start.

Follow the on-screen instructions.

Device Configuration

System Settings

Select Settings > System.

Sounds and Display: Adjusts the display and audio settings.

GPS: Provides information about the GPS satellites and

settings.

System Information: Provides information about the devices on

the network and the software version.

Station Information: Adjusts the setup of the station.

Auto Power Off: Automatically turns off the system after it has

been asleep for the selected length of time.

Simulator: Turns the simulator on or off and allows you to set

the time, date, speed, and simulated location.

Sounds and Display Settings

Select Settings > System > Sounds and Display.

Beeper: Turns on and off the tone that sounds for alarms and

selections.

Backlight: Sets the backlight brightness. You can select the

Auto option to adjust the backlight brightness automatically

based on the ambient light.

Backlight Sync: Synchronizes the backlight brightness of other

chartplotters in the station.

Color Mode: Sets the device to display day or night colors. You

can select the Auto option to allow the device to set day or

night colors automatically based on the time of day.

Background: Sets the background image.

Startup Image: Sets the image that appears when you turn on

the device.

GPS Settings

Select Settings > System > GPS.

Skyview: Shows the relative position of GPS satellites in the

sky.

GLONASS: Turns on or off GLONASS data (Russia satellite

system). When the system is used in situations with poor sky

visibility, GLONASS data can be used in combination with

GPS to provide more accurate position information.

WAAS/EGNOS: Turns on or off WAAS data (in North America)

or EGNOS data (in Europe), which can provide more-

accurate GPS position information. When using WAAS or

EGNOS data, the device may take longer to acquire

satellites.

Galileo: Turns on or off Galileo data (European Union satellite

system). When the system is used in situations with poor sky

visibility, Galileo data can be used in combination with GPS

to provide more accurate position information.

Speed Filter: Averages the speed of your vessel over a short

period of time for smoother speed values.

Source: Allows you to select the preferred source for GPS data.

Station Settings

Select Settings > System > Station Information.

Change Station: Sets the entire station to a new set of defaults

based on the location of this station. You can also select to

use this display as a stand-alone, individual display, instead

of grouping it with other displays to make a station.

GRID™ Pairing: Allows you to pair a GRID remote input device

with this station.

Display Order: Sets the order of the displays, which is

important when using a GRID remote input device.

Autopilot Enabled: Allows you to control the autopilot from this

device.

Reset Layouts: Resets the layouts in this station to the factory

default settings.

Reset Station Settings: Resets all station settings to on all

connected devices in the station to the factory default

settings, and requires initial station setup.

Viewing System Software Information

You can view the software version, the basemap version, all

supplemental map information (if applicable), the software

version for an optional Garmin radar (if applicable), and the unit

ID number. You may need this information to update the system

software or to purchase additional map data information.

Select Settings > System > System Information >

Software Information.

Viewing the Event Log

The event log shows a list of system events.

Select Settings > System > System Information > Event

Log.

Viewing E-label Regulatory and Compliance

Information

The label for this device is provided electronically. The e-label

may provide regulatory information, such as identification

numbers provided by the FCC or regional compliance markings,

as well as applicable product and licensing information. Not

available on all models.

Device Configuration 53

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info