Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 (Seite 14 von 66) (Englisch)

691431

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Select Enable.

The chartplotter begins searching for and connecting to the

wireless sensor.

To view data from the sensor, add the data to a data field or

gauge.

Adjusting the Wind Sensor Orientation

You should adjust this setting if the sensor does not face the

front of the boat, exactly parallel to the center line.

NOTE: The opening where the cable connects to the pole

indicates the front of the sensor.

Estimate the angle, in degrees clockwise around the mast, by

which the sensor points away from the center of the front of

the boat:

• If the sensor is facing starboard, the angle should be

between 1 and 180 degrees.

• If the sensor is facing port, the angle should be between

-1 and -180 degrees.

Select Settings > Communications > Wireless Devices.

Select the wind sensor.

Select Wind Angle Offset.

Enter the angle observed in step 1.

Select Done.

Charts and 3D Chart Views

The charts and 3D chart views that are available depend on the

map data and accessories used.

You can access the charts and 3D chart views by selecting

Charts.

Navigation Chart: Shows navigation data available on your pre-

loaded maps and from supplemental maps, if available. The

data includes buoys, lights, cables, depth soundings,

marinas, and tide stations in an overhead view.

Perspective 3D: Provides a view from above and behind the

boat (according to your course) and provides a visual

navigation aid. This view is helpful when navigating tricky

shoals, reefs, bridges, or channels, and is beneficial when

trying to identify entry and exit routes in unfamiliar harbors or

anchorages.

Mariner’s Eye 3D: Shows a detailed, three-dimensional view

from above and behind the boat (according to your course)

and provides a visual navigation aid. This view is helpful

when navigating tricky shoals, reefs, bridges, or channels,

and when trying to identify entry and exit routes in unfamiliar

harbors or anchorages.

NOTE: 3D chart views are available with premium charts, in

some areas.

Fish Eye 3D: Provides an underwater view that visually

represents the sea floor according to the chart information.

When a sonar transducer is connected, suspended targets

(such as fish) are indicated by red, green, and yellow

spheres. Red indicates the largest targets and green

indicates the smallest.

Fishing Chart: Provides a detailed view of the bottom contours

and depth soundings on the chart. This chart removes

navigational data from the chart, provides detailed

bathymetric data, and enhances bottom contours for depth

recognition. This chart is best for offshore deep-sea fishing.

NOTE: The Fishing chart is available with premium charts, in

some areas.

Radar Overlay: Superimposes radar information on the

Navigation chart or the Fishing chart, when the chartplotter is

connected to a radar. This feature is not available with all

models.

Navigation Chart and Fishing Chart

NOTE: The Fishing chart is available with premium charts, in

some areas.

The Nav. Chart is optimized for navigation. You can plan a

course, view map information, and use the chart as a

navigational aid. To open the Nav. Chart, select Charts > Nav.

Chart.

The Fishing Chart provides a detailed view with more bottom

detail and fishing content. This chart is optimized for use when

fishing. To open the Fishing Chart, select Charts > Fishing

Chart.

Zooming In and Out Using the Touchscreen

You can quickly zoom in and out of many screens, such as the

charts and sonar views.

• Pinch two fingers together to zoom out.

• Spread two fingers apart to zoom in.

Chart Symbols

This table contains some of the common symbols you might see

on the detailed charts.

Icon Description

Buoy

Information

Marine services

Tide station

Current station

Overhead photo available

Perspective photo available

Other features common to most charts include depth contour

lines, intertidal zones, spot soundings (as depicted on the

original paper chart), navigational aids and symbols,

obstructions, and cable areas.

Measuring a Distance on the Chart

From a chart or the Radar overlay, select a location.

Select Measure.

A push pin appears on the screen at your present location.

The distance and angle from the pin is listed in the corner.

TIP: To reset the pin and measure from the current location of

the cursor, select Select.

Creating a Waypoint on the Chart

From a chart, select a location or object.

Select .

Viewing Location and Object Information on a Chart

You can view information, such as tide, current, celestial, chart

notes, or local services, about a location or an object on the

Navigation chart or the Fishing chart.

From the Navigation chart or Fishing chart, select a location

or object.

6 Charts and 3D Chart Views

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info