Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 (Seite 38 von 66) (Englisch)

691431

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

You can configure how other vessels appear on the Radar

screen. If any setting (except the AIS display range) is

configured for one radar mode, the setting is applied to every

other radar mode. The details and projected heading settings

configured for one radar mode are applied to every other radar

mode and to the Radar overlay.

From a Radar screen or the Radar overlay, select Menu >

Other Vessels > Display Setup.

Select an option:

• To indicate the distance from your location within which

AIS vessels appear, select Display Range, and select a

distance.

• To show details about AIS-activated vessels, select

Details > Show.

• To set the projected heading time for AIS-activated

vessels, select Proj. Heading, and enter the time.

• To show the tracks of AIS vessels, select Trails, and

select the length of the track that appears.

VRM and EBL

The variable range marker (VRM) and the electronic bearing line

(EBL) measure the distance and bearing from your boat to a

target object. On the Radar screen, the VRM appears as a circle

that is centered on the present location of your boat, and the

EBL appears as a line that begins at the present location of your

boat and intersects the VRM. The point of intersection is the

target of the VRM and the EBL.

Showing the VRM and the EBL

From a radar screen, select Menu > Radar Options > Show

VRM/EBL.

Adjusting the VRM and the EBL

Before you can adjust the VRM and the EBL, you must show

them on the Radar screen (Showing the VRM and the EBL,

page 30).

You can adjust the diameter of the VRM and the angle of the

EBL, which moves the intersection point of the VRM and the

EBL. The VRM and the EBL configured for one mode are

applied to all other radar modes.

From a Radar screen, select a new location for the

intersection point of the VRM and the EBL.

Select Drop VRM/EBL.

Select Stop Pointing.

Measuring the Range and Bearing to a Target Object

Before you can adjust the VRM and the EBL, you must show

them on the Radar screen (Showing the VRM and the EBL,

page 30).

From a Radar screen, select the target location.

Select Measure.

The range and the bearing to the target location appear in the

upper-left corner of the screen.

Echo Trails

The echo trails feature enables you to track the movement of

vessels on the radar display. As a vessel moves, you can see a

faint trail

of the vessel's wake. You can change the length of

time the trail is displayed.

NOTE: Depending upon the radar in use, the settings configured

for use in one radar mode may or may not be applied to other

radar modes or to the radar overlay.

NOTE: This feature is not available on xHD open array or

HD/HD+ radome models.

Turning on Echo Trails

From a radar screen, select Menu > Radar Options > Echo

Trails > Display.

Adjusting the Length of the Echo Trails

From a radar screen or the radar overlay, select Menu >

Radar Options > Echo Trails > Time.

Select the length of the trail.

Clearing the Echo Trails

You can remove the echo trails from the radar screen to reduce

the clutter on the screen.

From a radar screen, select Menu > Radar Options > Echo

Trails > Clear Trails.

Optimizing the Radar Display

You can adjust the radar display settings for reduced clutter and

increased accuracy.

NOTE: You can optimize the radar display for each radar mode.

Select a radar range (Adjusting the Radar Range, page 28).

Restore the default value of the gain setting (Adjusting Gain

on the Radar Screen Automatically, page 30).

Adjust the gain setting manually (Adjusting Gain on the

Radar Screen Manually, page 30).

Radar Gain and Clutter

Adjusting Gain on the Radar Screen Automatically

The automatic gain setting for each radar mode is optimized for

that mode, and may differ from the automatic gain setting used

for another mode.

NOTE: Depending upon the radar in use, the gain setting

configured for use in one radar mode may or may not be applied

to other radar modes or to the Radar overlay.

NOTE: Not all options are available on all radar models.

From a radar screen or the radar overlay, select Menu >

Gain.

Select an option:

• To adjust the gain automatically for changing conditions,

select Auto Low or Auto High.

• To adjust the gain automatically to show birds over the

surface of the water, select Auto Bird.

NOTE: This option is not available on xHD open array or

HD/HD+ radome models.

Adjusting Gain on the Radar Screen Manually

For optimal radar performance, you can manually adjust the

gain.

NOTE: Depending upon the radar in use, the gain setting

configured for use in one radar mode may or may not be applied

to other radar modes or to the Radar overlay.

30 Radar

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMap 8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info