Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 (Seite 15 von 78) (Englisch)

691427

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Wi‑Fi Network

Setting Up the Wi‑Fi Wireless Network

The chartplotters can create a Wi‑Fi network to which you can

connect wireless devices. The first time you access the wireless

network settings, you are prompted to set up the network.

Select Settings > Communications > Wi-Fi Network > Wi-

Fi > On > OK.

If necessary, enter a name for this wireless network.

Enter a password.

You will need this password to access the wireless network

from a wireless device. The password is case-sensitive.

Connecting a Wireless Device to the Chartplotter

Before you can connect a wireless device to the chartplotter

wireless network, you must configure the chartplotter wireless

network (Setting Up the Wi

‑

Fi Wireless Network, page 7).

You can connect multiple wireless devices to the chartplotter to

share data.

From the wireless device, turn on the Wi‑Fi technology and

search for wireless networks.

Select the name of your chartplotter wireless network (Setting

Up the Wi

‑

Fi Wireless Network, page 7).

Enter the chartplotter password.

Changing the Wireless Channel

You can change the wireless channel if you have trouble finding

or connecting to a device, or if you experience interference.

Select Settings > Communications > Wi-Fi Network >

Advanced > Channel.

Enter a new channel.

You do not need to change the wireless channel of devices

connected to this network.

Changing the Wi‑Fi Host

You can change which chartplotter is serving as the Wi‑Fi host.

This can be helpful if you are having trouble with Wi‑Fi

communications. Changing the Wi‑Fi host allows you to select a

chartplotter that is physically closer to your mobile device.

Select Settings > Communications > Wi-Fi Network >

Advanced > Wi-Fi Host.

Follow the on-screen instructions.

Wireless Remote Control

These steps are not applicable to the GRID

™

remote input

devices (Pairing the GRID Device with the Chartplotter from the

Chartplotter, page 61).

Pairing the Wireless Remote Control With the

Chartplotter

Before you can use the wireless remote control with a

chartplotter, you must pair the remote with the chartplotter.

You can connect a single remote to multiple plotters, and then

press the pairing key to switch between the chartplotters.

Select Settings > Communications > Wireless Devices >

Wireless Remotes > GPSMAP® Remote.

Select New Connection.

Follow the on-screen instructions.

Turning On and Off the Remote Backlight

Turning off the remote backlight can significantly increase the

battery life.

On the chartplotter, select Settings > Communications >

Wireless Devices > Wireless Remotes > GPSMAP®

Remote > Backlight.

Follow the on-screen instructions.

Disconnecting the Remote from All Chartplotters

On the chartplotter, select Settings > Communications >

Wireless Devices > Wireless Remotes > GPSMAP®

Remote > Disconnect All.

Follow the on-screen instructions.

Wireless Wind Sensor

Connecting a Wireless Sensor to the Chartplotter

You can view data from a compatible wireless sensor on the

chartplotter.

Select Settings > Communications > Wireless Devices.

Select the wind sensor.

Select Enable.

The chartplotter begins searching for and connecting to the

wireless sensor.

To view data from the sensor, add the data to a data field or

gauge.

Adjusting the Wind Sensor Orientation

You should adjust this setting if the sensor does not face the

front of the boat, exactly parallel to the center line.

NOTE: The opening where the cable connects to the pole

indicates the front of the sensor.

Estimate the angle, in degrees clockwise around the mast, by

which the sensor points away from the center of the front of

the boat:

• If the sensor is facing starboard, the angle should be

between 1 and 180 degrees.

• If the sensor is facing port, the angle should be between

-1 and -180 degrees.

Select Settings > Communications > Wireless Devices.

Select the wind sensor.

Select Wind Angle Offset.

Enter the angle observed in step 1.

Select Done.

Viewing Boat Data on a Garmin Watch

You can connect a compatible Garmin watch to a compatible

chartplotter to view data from the chartplotter.

Bring the Garmin watch within range (3 m) of the chartplotter.

From the watch clock screen, select START > Boat Data >

START.

NOTE: If you have already connected to a chartplotter, and

would like to connect to a different chartplotter, open the Boat

Data screen, hold UP, and select Pair new.

On the chartplotter, select Communications > Wireless

Devices > Connect IQ™ Apps > Boat Data > Enable >

New Connection.

The chartplotter begins searching for and connecting to the

wearable device.

After the devices are paired, they connect automatically when

they are turned on and within range.

Viewing Boat Data on a Garmin Nautix

™

Device

You can connect a Garmin Nautix device to the chartplotter to

view charplotter data on the Garmin Nautix device.

NOTE: You can connect a Garmin Nautix device to multiple

compatible devices for better coverage on larger vessels.

Bring the a Garmin Nautix device within range (3 m) of the

chartplotter.

Communication with Wireless Devices 7

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info