Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 (Seite 69 von 78) (Englisch)

691427

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

Follow the on-screen instructions.

Wait several minutes while the software update process

completes.

When prompted, leave the memory card in place and restart

the chartplotter manually.

Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

Touchscreen Controls for a Connected

Computer (MFD models)

NOTICE

To prevent corrosion due to moisture, you must use Garmin

GPSMAP accessory cables when connecting the chartplotter to

the computer. Using different cables voids your warranty.

You can connect the chartplotter to a computer to see the

computer screen on the chartplotter touchscreen and control the

computer using the chartplotter touchscreen. To see the

computer screen, you must connect the computer to the HDMI

IN port. To control the computer, you must connect the

computer to the USB port.

The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft)

long. If you need a longer cable, you should use an active HDMI

cable only. You need an HDMI coupler to connect the two HDMI

cables.

The Garmin GPSMAP USB accessory cable is 4.5 m (15 ft)

long. If you need a longer cable, you should use a USB hub or

USB repeater extension cable only.

You must make all cable connections in a dry environment.

Item Device or port Cable

Computer

GLASS COCKPIT chartplotter (MFD)

Computer's HDMI OUT port Garmin HDMI Cable

Chartplotter's HDMI IN port

Computer's USB port Garmin USB Cable

Chartplotter's USB port

Controlling a Computer with the Chartplotter

Before you can control a computer using the chartplotter, you

must connect the chartplotter and computer correctly. See the

chartplotter installation instructions for connection information.

Select A/V, Gauges, Controls > Video.

Select the HDMI source for the computer.

Select Menu > USB Touch Out.

You can now control your computer using two-finger touch

gestures on the chartplotter screen.

If necessary, select Menu > Full Screen to view the

computer screen in full screen mode.

TIP: To exit full screen mode, press .

Pairing the GRID Device with the

Chartplotter from the Chartplotter

NOTE: These steps are applicable to both the GRID device and

the GRID 20 device.

Before you can pair the GRID 20 device with the chartplotter to

make the data connection, you must supply power using

batteries, the included power cable, or a NMEA 2000 network

connection.

Before you can pair the GRID device with the chartplotter, you

must connect it to the Garmin Marine Network.

Select Settings > System > Station Information > GRID™

Pairing > Add.

Select an action:

• On the GRID remote input device, press SELECT.

• On the GRID 20 remote input device, press and until

the remote control beeps three times.

Pairing the GRID Device with the Chartplotter from

the GRID Device

NOTE: This is not applicable to the GRID 20 device.

On the GRID remote input device, press + and HOME at the

same time.

A selection page opens on all of the chartplotters on the

Garmin Marine Network.

Rotate the wheel on the GRID remote input device to

highlight Select on the chartplotter you want to control with

the GRID remote input device.

Press SELECT.

Rotating the GRID Remote Input Device

For certain installation situations, you can rotate the orientation

of the GRID device.

NOTE: This is not applicable to the GRID 20 device.

Select Settings > Communications > Marine Network.

Select the GRID device.

Cleaning the Screen

NOTICE

Cleaners containing ammonia will harm the anti-reflective

coating.

The device is coated with a special anti-reflective coating which

is very sensitive to waxes and abrasive cleaners.

Apply an eyeglass lens cleaner specified as safe for anti-

reflective coatings to the cloth.

Gently wipe the screen with a soft, clean, lint-free cloth.

Viewing Images on a Memory card

You can view images that are saved on a memory card. You

can view .jpg, .png, and .bmp files.

Insert a memory card with image files into the card slot.

Select Info > Image Viewer.

Select the folder containing the images.

Wait a few seconds for the thumbnail images to load.

Select an image.

Use the arrows to scroll through the images.

If necessary, select Menu > Start Slideshow.

Appendix 61

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 8600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info