Bedienungsanleitung Garmin Xero A1i (Seite 11 von 14) (Englisch)

691377

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Clear Session Shot Odometer: Clears the shot history for the

current session.

Clear Total Shot Odometer: Clears the entire shot history

stored on the bow sight.

Units Settings

From the main menu, select > Units.

Distance: Sets the unit of measure for distance.

Decimal Precision: Shows more precise measurements for the

laser rangefinder. Measurements are rounded to the nearest

tenth of a meter or yard.

Level Settings

From the main menu, select > Level.

View Gauge: Displays the angle of the bow. You can use this

option to adjust the position of the bubble level.

Set Level to Zero: Sets the electronic level to zero. You can

use this option if you have mechanically leveled your bow but

the digital level does not read zero.

Indicators: Sets level indicators to appear when shooting. This

can help you hold the bow level while aiming (Level Indicator,

page 4).

Threshold: Sets the amount of degrees of cant allowed before

the indicators flash. A lower threshold reduces the amount of

cant allowed.

Indicator Color: Sets the color of the level indicator.

NOTE: This setting is available only on A1i models.

Calibrating the Compass

NOTE: You must calibrate the electronic compass outdoors. Do

not stand near objects that influence magnetic fields, such as

cars, buildings, or overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If the Laser Locate

feature is not working properly, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

NOTE: The Laser Locate and compass features are available

only on A1i models.

From the main menu, select > Calibrate Compass.

Follow the on-screen instructions.

Customizing the Position of the Top Pin

For bow configurations that require additional vertical

adjustment, you can customize the position of the top pin. This

can also be useful for people who prefer the short range pins to

be more centered within the device optic.

NOTE: Changing the position of the top pin clears all arrow

profile settings.

From the main menu, select > Manual Adjustment >

Custom Top Pin Placement.

Select Yes.

Press or to adjust the position of the top pin.

Press OK.

Follow the on-screen instructions to calibrate the device for

the new top pin position (Setting the Primary Pin, page 2).

Moving the Calibrated Range Stack

You can move the calibrated pins up or down to allow more

adjustment in the direction of your choice. For example, if your

primary pin is set at 20 yards, and your maximum pin is set at 70

yards, you can move the range stack up so you can add pins for

farther ranges. Alternatively, you can move the calibrated range

stack down so your pins are more centered within the device

optic. You must adjust your mechanical alignment after moving

the calibrated range stack. Moving the calibrated range stack

updates all arrow profile settings.

NOTE: The device stores pins that are positioned above or

below the optic. These pins are still listed as calibrated ranges,

and can be moved back onto the optic at any time.

From the main menu, select > Manual Adjustment >

Move Calibrated Range Stack.

Select Yes.

Press or to adjust the position of the range stack.

Press OK.

Follow the on-screen instructions to calibrate the device for

the new stack position (Setting the Primary Pin, page 2).

Device Information

Device Specifications

Battery type Replaceable 1.5 V AAA lithium

Battery life Up to 25,000 laser ranges

Up to 1 year in standby mode

Operating

temperature range

From -20° to 60°C (from -4° to 140°F)

NOTICE

Do not expose the device to temperatures

above 60°C (140°F).

Storage temperature

range

From -20° to 60°C (from -4° to 140°F)

Water rating IEC 60529 IPX7*

Wireless frequency/

protocol

ANT

2.4 GHz @ 4 dBm nominal

*The device withstands incidental exposure to water of up to 1 m

for up to 30 min. For more information, go to www.garmin.com

/waterrating.

Viewing E-label Regulatory and Compliance

Information

The label for this device is provided electronically. The e-label

may provide regulatory information, such as identification

numbers provided by the FCC or regional compliance markings,

as well as applicable product and licensing information.

Press OK to open the menu.

Select .

Select About.

Product Updates

On your computer, install Garmin Express

™

(www.garmin.com

/express).

This provides easy access to these services for Garmin devices:

• Software updates

• Product registration

Updating the Software Using a Computer

You can use Garmin Express software to download and install

the latest software updates for your device. Garmin Express is

available for Windows

and Mac

computers.

On your computer, go to garmin.com/express.

Select an option:

• To install on a Windows computer, select Download for

Windows.

• To install on a Mac computer, select Download for Mac.

Open the downloaded file, and follow the on-screen

instructions to complete the installation.

Device Information 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Xero A1i Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Xero A1i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info