Bedienungsanleitung Garmin Zumo 310 (Seite 21 von 24) (Englisch)

501819

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Remove the clear plastic cover from the top of the disk.

Place the suction cup mount on top of the disk.

Flip the lever down (toward the disk).

Removing the Device, Cradle, and Mount

Removing the Device from the Cradle

Press the tab on the top of the cradle.

Tilt the device forward.

Removing the Cradle from the Mount

Turn the cradle to the right or left.

Apply pressure until the socket on the cradle releases the

ball on the mount.

Removing the Suction Cup from the Windshield

Flip the lever on the suction cup toward you.

Pull the tab on the suction cup toward you.

Purchasing Additional Maps

Go to your device product page at (www.garmin.com).

Click the Maps tab.

Follow the on-screen instructions.

Safety Cameras

NOTICE

Garmin is not responsible for the accuracy of or the

consequences of using a custom point of interest or a safety

camera database.

Safety camera information is available in some locations. Check

www.garmin.com/safetycameras for availability. For these

locations, you can purchase a subscription for safety camera

information. The subscription includes the locations of hundreds

of safety cameras. Your device alerts you when you are

approaching a safety camera and can warn you if you are

driving too fast. The data is updated at least weekly, so you can

update your device regularly to receive the most up-to-date

information.

You can purchase a new region or extend an existing

subscription at any time. Each region that you purchase has an

expiration date.

Custom Points of Interest

Custom POIs are customized points on the map. They can

contain alerts that let you know if you are near a designated

point or if you are traveling faster than a specified speed.

Installing POI Loader

You can create or download custom POI lists on your computer

and install them on your device using POI Loader software.

Go to www.garmin.com/poiloader.

Follow the on-screen instructions.

Using the POI Loader Help Files

For more information on the POI loader, refer to the Help file.

With the POI loader open, click Help.

Finding Custom POIs

Before you can find custom POIs, you must load custom POIs

on your device using the POI Loader software (page 17).

Select Where To? > Categories.

Scroll to the Other Categories section, and select a category.

Purchasing Accessories

Go to http://buy.garmin.com.

Troubleshooting

My device is not acquiring satellite signals

• Verify the GPS simulator is turned off (page 15).

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable (page 16).

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is between 32°

and 113°F (between 0° and 45°C).

• Verify that the fuse is not broken in the vehicle power outlet.

My battery does not stay charged for very

long

• Decrease the screen brightness (page 15).

• Shorten the display timeout (page 15).

• Decrease the volume (page 3).

• Disable Bluetooth wireless technology (page 15).

• Put the device in sleep mode when not in use (page 3).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

The battery gauge does not seem accurate

Allow the device to fully discharge.

Fully charge the device without interrupting the charge cycle.

My device does not appear as a removable

drive on my computer

On most Windows computers, the device connects using Media

Transfer Protocol (MTP). In MTP mode, the device appears as

a portable device and not as a removable drive. MTP mode is

supported by Windows 7, Windows Vista

, and Windows XP

Service Pack 3 with Windows Media Player 10.

My device does not appear as a portable

device on my computer

On Mac computers and some Windows computers, the device

connects using USB mass storage mode. In USB mass storage

mode, the device appears as a removable drive or volume, and

not as a portable device. Windows versions prior to Windows

XP Service Pack 3 use USB mass storage mode.

My device does not appear as either a

portable device or a removable drive or

volume on my computer

Disconnect the USB cable from your computer.

Turn off the device.

Plug the USB cable into a USB port on your computer and

into your device.

TIP: Your device should be connected directly to a USB port

on your computer and not to a USB hub.

The device automatically turns on and goes into MTP mode or

USB mass storage mode. A picture of the device connected to a

computer appears on the device screen.

Troubleshooting 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Zumo 310 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Zumo 310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info