714630
115
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
115
Problem Reason The Solution
The display is illu-
minated, showing a
speed selection, but
the motor does not
respond.
The processing sys-
tem is not installed
correctly. For your
safety, the safety
interlocks prevent
operation.
Ensure to install the processing system completely and correctly
(see: ‘Assembling the Juicing System’ or ‘Assembling the Glass
Jugs’).
Optional accessories: in most cases the thread between blade
assembly and glass container is not screwed on sufficiently
tight, or the system is not locked correctly to the motor base.
Perhaps, the sealing ring is missing.
The overheat protec-
tion device has been
triggered.
Turn the selection dial to “OFF”, switch off at the power switch,
and unplug the appliance (see: ‘Self-Resetting Overheat Protec-
tion Device’). Leave the appliance cool down for at least 1/2
hour. Do not let the appliance operate continuously for a too
long time (see: ‘Method of Operation and Making Breaks’).
The motor has been
stalled for more
than 10 seconds.
The overload protec-
tion has been trig-
gered.
Turn the selection dial to “OFF”, switch off at the power switch,
and unplug the appliance. Remove the obstacle. Thereafter, you
may start operation again.
The automatic shut-
off has been trig-
gered.
After leaving the appliance in operational mode for more then
20 minutes, the automatic shut-off is activated. Simply turn the
selection dial to another speed selection to re-activate the appli-
ance (see: ‘Automatic Shut-Off’).
From the start on,
the motor seems to
run with an uneven
speed.
This may appear
during operation.
Depending on the load that is straining the motor, regularly
make breaks every 7-20 minutes to avoid overheating (see:
‘Method of Operation and Making Breaks’).
The appliance is
operated on heavy
load.
With a large amount of hard, glutinous, or fibrous food and/
or large, hard pieces of food, the motor is strained with hea-
vy load. After max. 7 minutes of continuous operation, make
a break of 20 minutes to avoid overheating (see: ‘Method of
Operation and Making Breaks’).
115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gastroback 40152 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info