512588
27
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
WARNING: Always release the ON-button, wait until the motor stops
completely and unplug the appliance before assembling or dismantling the
tools.
10. Release the stainless steel whisk form the motor block by pressing both
release-buttons. Clean the appliance in accordance to the instructions in
chapter›Careandcleaning‹.Donot leave any food to dry on the surface
of the appliance.
Usingthechopperattachment
Chopperisperfectlysuitedforhardfood,suchaschoppingmeat,cheese,
onion, herbs, garlic, carrots, walnuts, almonds, prunes etc.
Note: Don’t chop extremely hard food, such as ice cubes, nutmeg, coffee
beans and grains.
WARNING: Always release the ON-button, wait until the motor stops and
unplug the appliance before opening the chopper and taking out the food,
laying down the appliance or assembling/dismantling the min-chopper.
Before connecting the appliance to the mains power supply, always ensure
that the appliance is assembled correctly, according to the following instruc-
tions. Donot touch the blade of the chopper with your hands or any objects
(i.e. hair, clothes, tissue), when it is mounted and the appliance is connected
to the mains power supply.
1. Prepare your food.
WARNING: The chopper vessel is not heat resistant. The max. tempera-
ture is 70 degrees. Let the boiling food cool down a little bit before filling
it into the vessel.
2.
Ensure, that the appliance is unplugged.
WARNING: The blade of the chopper is very sharp. Do not touch the
blades. Always handle the tools by the shaft.
3. Place the blade of the chopper on the centre pin of the vessel (see picture
H). Than turn it clockwise to lock it into place. Always place the chopper
vessel on the non-slip-rubber base to avoid injuries.
4. Place the prepared food into the chopper and place the lid onto the vessel
(see picture I). Fill the vessel only up to the 500 ml mark. Place the shaft of
the chopper onto the motor block and press together until it snaps into place
(see picture J, next page). There may be no gap between the motor housing
and the chopper. The blender shaft must be locked firmly and may not wob-
ble (see picture K, next page).
5.Choosethespeedwiththevariablecontrolswitch.
6.Connectthepowerplugtoasuitablewallpoweroutlet.
7. Hold on to the chopper vessel with one hand and press the ON-button to start
the motor.
27
G
H
I
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gastroback 40974 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gastroback 40974

Gastroback 40974 Bedienungsanleitung - Deutsch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info