Bedienungsanleitung Gastroback 40977 (Seite 55 von 65) (Deutsch, Englisch)

714637

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

EN EN

108 109

2. Hold the mincer housing with the thread facing upwards and insert the worm shaft

with the long, hexagonal shaft facing downwards. When inserted correctly, the

hexagonal shaft protrudes the mincer housing at the coupling side (bottom).

3. Place the black plastic cross (cookie adapter) on the pin in the centre of the

worm shaft. Ensure correct orientation: the label .“FRONT” must face upwards.

Turn the cookie adapter until the spigots at the rim of the cookie adapter engage

in the notches at the rim of the mincer housing.

4. Place the metal cover on the cookie adapter and turn the metal cover until the

notches at the rim slide onto the spigots of the cookie adapter. If positioned cor-

rectly, there is no gap between the cookie adapter and the metal cover.

5. Turn the screw ring hand-tight onto the mincer housing.

6. Prepare the machine for operation (see: ‘Preparation’).

7. For removing the protecting cover of the mincer coupling at the mixing arm, turn

the protecting cover clockwise and pull it out.

8. Holding the feed chute of the mincer in the 2'clock position, insert the coupling

of the mincer with the protruding hexagonal shaft into the mincer coupling of the

mixing arm. If required, turn the mincer to and fro a little until it slides into the

mincer coupling.

9. While pressing the release button, turn the mincer counter-clockwise to the stop.

The feed chute must face upwards vertically and the mincer must be engaged

firmly, when releasing the release button.

10. Place the tablet onto the feed chute of the mincer.

11. From the side of the mincer, insert the cookie mask into the slit between the metal

cover and cookie adapter and push the cookie mask in, until the desired ope-

ning is positioned in the centre of the metal cover.

NOTE

You select the shape of your cookies via the position of the cookie mask.

Forming the Cookie Dough

12. Place the dough roll onto the tablet of the mincer.

13. Connect the machine to a suitable wall power outlet (see: ‘Important Safegu-

ards for Electrical Appliances’). The display areas show dashes and an acoustic

signal sounds. The stand mixer is in standby mode now.

WARNING – Do not hold your hands or any foreign objects (e.g. cooking

utensils) into the feed chute of the mincer or at the mixing drive, while the machine

is connected to the power supply. Always use the provided pusher for pushing

down your food within the feed chute.

14. Hold the control dial pressed for approx. 2 seconds for switching on the machi-

ne. A signal sounds and “00” flashes on the speed display. The operating time

display shows the default operating time: “20:00” (20 minutes).

15. If you wish a reminder for making breaks in time, you should set the timer of the

machine to 10 minutes (see: ‘Operating Time and Pause Function’).

16. Turn the control dial until the speed setting “10” is shown at the speed display.

17. It is best to hold your hand or a small tablet directly below the outlet of the min-

cer, while pushing the dough roll into the feed chute. Try to push the dough as

evenly as possible into the feed chute. Let the shaped dough slide onto your

hand or onto the tablet.

18. When the piece of dough coming out of the mincer has reached the desired

length, cut off the dough via a sharp knife or pair of scissors just at the outlet of

the mincer. If required, stop the motor for this by pressing the control dial (see:

‘Operating Time and Pause Function’). However, when being experienced, you

may keep the motor running, while separating the shaped pieces of dough.

19. Put down the pieces of shaped dough onto the tablet or baking tray, while a

second person is inserting the dough roll slowly into the opening of the feed

chute. If required, use the pusher to push your food slowly and without much

pressure down in the feed chute.

20. After processing the prepared dough roll, press the control dial for stopping the

motor (see: ‘Operating Time and Pause Function’).

21. If required, prepare the next dough roll and place it onto the tablet of the mincer.

Then repeat steps 16 to 20.

22. When you do not wish to use the machine for another portion, switch off the

machine by holding the control dial pressed until only dashes are displayed

(see: ‘After Usage’). Unplug the machine.

23. Remove the mincer from the mixing arm (see: ‘After Usage’). Immediately there-

after, clean the machine and any used accessories (see: ‘Care and Cleaning’).

NOTE

You should bake the prepared cookies immediately according to the instructions

in your recipe.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gastroback 40977 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info