Bedienungsanleitung Gastroback 40977 (Seite 57 von 65) (Deutsch, Englisch)

714637

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

EN EN

112 113

NOTE

When the motor is in operation or the pause function is active, you cannot chan-

ge the operating time. There will be no respond to the arrow keys. If you wish

to select another operating time, you need to cancel operation first (see below:

‘Cancelling Operation’).

USING THE PAUSE FUNCTION

During operation, at any time you like, you can activate the pause function. This will

turn off the motor and freeze the timer at the current point (see: ‘Properties of Your

New Stand Mixer / Pause Function’). Use this function for checking the mixing result

or adding additional ingredients without changing the current timer setting.

WARNING – Do not touch any moving parts (e.g. mixing drive, mincer

coupling, moved parts of the mincer), while the machine is connected to the

power supply. For pushing down your food in the mixing bowl, use a soft spatula.

For changing the mixing tool, always cancel operation completely (press the con-

trol dial for approx. 2 seconds) and unplug the machine. Thereafter move the

mixing arm to the upper position (see: ‘After Usage’).

IMPORTANT - When turning the control dial to zero with the pause function acti-

vated, the remaining operating time is deleted and the default value (20 minutes)

is shown again (see below: ‘Cancelling Operation’).

1. Shortly press the control dial for activating the pause function. Motor and timer

stop immediately.

2. If you wish to add further ingredients, in most cases you can use the feed ope-

ning in the splash guard. Cut large ingredients to smaller pieces.

3. For re-assuming operation, shortly press the control dial again. Motor and timer

continue running.

CANCELLING OPERATION

You may cancel operation at any time you like. This can be done in two ways:

• turning the control dial to zero or

• holding the control dial pressed for approx. 2 seconds until the signal sounds

and only dashes are displayed (see: ‘After Usage’).

NOTE

When moving the mixing arm to the upper position, the machine is switched off

automatically. However, in any case you should switch off the motor and unplug

the machine, before moving the mixing arm to the upper position.

NOTE

No matter, which way you choose for switching off the motor, the settings of the

speed and timer will be lost and the machine goes back to the defaults: speed

zero and operating time 20 minutes. If you wish to keep the set values, use the

pause function for stopping the motor (see above).

AFTER USAGE

WARNING – While the machine is connected to the power supply, do not

hold your hands or any objects (e.g. cooking utensils or brushes) into the mixing bowl

or onto the moving parts (mixing drive, mixing tools, mincer coupling, worm shaft,

cross blade). Always switch off (press the control dial until the beep sounds) and

unplug the machine before touching moving parts of the machine or accessories and

before unlocking the mixing arm via the unlock button, and before disassembling any

accessories. Do not hold your hand into the joint for the mixing arm to avoid crushing

your hands. Do not grasp into the feed chute of the mincer or turn off the screw ring

of the mincer, while the mincer is installed at the mixing arm. Do not leave the machi-

ne unattended, when the machine is connected to the power supply.

NOTE

Ensure that the mixing arm is engaged in the upper position, when inserting or

removing the mixing bowl and/or mixing tools.

Always switch off and unplug the machine when the machine is not in use. Remove

all used accessories (see below: ‘Removing the Mixing Tool’ and ‘Removing and

Disassembling the Mincer’). Clean the machine and all used accessories (see: ‘Care

and Cleaning’). This is the best way of keeping your machine and the accessories

hygienically clean and ready for use.

SWITCHING OFF THE MACHINE

1. Press the control dial until the beep sounds (approx. 2 seconds) and only dashes

are shown on the display areas (standby mode).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gastroback 40977 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info