other objects or walls and 50 cm to the edge of the working space. During operation leave
at least 50 cm of free space above the appliance for unhindered access.
Do not place the Design Mixer over any type of heat-producing appliance or any other heat
source to avoid injuries and damage.
For operation, always unwind the power cord completely to avoid risk of overheating and
fire.
6. Place the appliance on a working space that meets the requirements mentioned above.
7. Place the jug on the power base. The jug must stand stable and may not wobble.
Insert the lid on top of the jug. Press the lid carefully down until it closes firmly.
OPERATION
WARNING: The appliance is intended for cutting and mixing food. For this, the appliance
is equipped with sharp knives and other electrically driven moving parts. Do not operate the
appliance before assembling the appliance completely and correctly. (See: Operating the
Design Mixer) Always mount the jug correctly and stable on the power base before operation.
DO NOT insert any parts of your body (e.g. hands, hair) or any foreign objects (e.g. cooking
utensils, clothes) in the jug or drive shaft coupling in the power base, while the appliance is
connected to the power supply to avoid risks of injuries and damage. Only use the provided
accessories (citrus cone) and plastic cooking utensils with the appliance.
Always switch OFF (press ON/OFF button, indicator goes out), then unplug the appliance,
before assembling or disassembling any parts. Always turn the Design Mixer off and unplug
before reaching inside the jug. Before operation, always ensure that you have assembled the
appliance completely and correctly according to the instructions in this booklet and that there
are no foreign objects in the jug. Carefully remove hard, inedible parts of your foods (e.g.
bones, stalks, wooden shells) completely before processing.
Do not place clothes, tissues or any other foreign objects under the appliance during opera-
tion. Do not place the appliance over a power cord. Do not use any hard or sharp-edged
objects (e.g. forks, knives, cooking utensils) to avoid damage to the appliance. Do not use
violence!
Do not process hot food. Always leave hot ingredients cool down until at least lukewarm,
before filling into the jug.
If liquids come out from under the lid, run down the exterior of the appliance and/or accu-
mulate under the power base, immediately switch OFF (press ON/OFF button) and unplug
the appliance to avoid injuries and damage by electric shock. Always wipe off spilled liquids
immediately. Do not overfill the jug. Always observe the maximum amount of 1.5 litres. If
liquids accumulate again under the appliance, possibly the jug is leaking.
Do not use the appliance, if the jug is leaking or damaged in any way to avoid hazard of
overheating, fire, and electric shock. If the jug is damaged, replace the jug, before using the
appliance again. Contact your authorized service centre. The ventilation slits in the power
base must always be unobstructed.
Do not switch on the appliance without any food or liquid in the jug to avoid damage to the
motor.
52 53
