714683
45
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
45
SOLVING PROBLEMS
If any problems occur during operation, you will find solutions in this section.
Problem Reason The Solution
The appliance doesn’t
turn on
AND/OR
the motor doesn’t start
AND/OR
the blade assembly
doesn’t rotate.
The appliance is not live. Ensure that the appliance is plugged in.
Ensure that the wall power outlet is live.
The safety interlock is
active, because the blade
assembly or the jar is not
installed correctly.
The blade assembly must be screwed correctly onto the
jar and may not be misaligned. Turn the blade assem-
bly approx. 1/8 revolutions clockwise onto the jar. See:
‘Assembling the Appliance’.
The blade assembly is
blocked.
Disconnect the appliance from the power supply and remo-
ve the obstacles in the jar. Cut your food in smaller pieces
before processing. Process in smaller portions and in short
pulses. See: ‘Processing Your Food’.
The thermal safety
switch is active.
Unplug and leave the appliance cool down for approx. 30
minutes. Then try again.
There is a severe pro-
blem.
Unplug the appliance and call your customer service for sup-
port. See: ‘Information and Service’.
Motor stops during ope-
ration without any appa-
rent reason.
The thermal safety
switch is active.
Unplug and leave the appliance cool down for approx. 30
minutes. Then try again.
Food is too finely chop-
ped or too watery.
The food has been over
processed.
The appliance will process your food in a few seconds. Use
short operating for best results.
The food is unevenly
chopped and lumpy.
Ingredients cling to the
inner walls of the jar.
Operate the appliance in short pulses to get an even result.
The jar is overfilled. Process your food in smaller batches. For frozen ingredients,
pulse in short intervals of 2-5 seconds.
The pieces of food are
too large.
Cut your food in smaller pieces (2 cm at the maximum).
You can not get snow
from ice cubes.
The ice has not been
cold enough and has
been thawed already.
For best result use ice straight from the freezer.
You are not pulsing pro-
perly.
Try operating in short intervals.
The jar has been wet,
when filling in the ice.
Make sure the jar is completely dry before adding ice.
45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gastroback 41039 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info