Bedienungsanleitung Gazco Clarendon - coal (Seite 5 von 28) (Englisch)

813476

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

2.3 Ensure that the left-hand control knob is pointing to off ( ).

2.4 Ensure that the right-hand control knob is pointing to off ( ).

AR0914

2.5 Press in the right-hand control knob and, keeping he knob

depressed, turn it anti-clockwise until a click is heard and

the knob is pointing to pilot ( ). The pilot should now light.

If the pilot does not light, release the knob and repeat the

procedure until it does.

2.6 Keep the control knob pressed in for 10 seconds and then

release it, the pilot should stay alight. If the pilot goes out,

repeat the procedures until it remains lit.

2.7 If the pilot does not light after repeated attempts, contact

the retailer or installer from whom the appliance was

purchased.

2.8 Turn the right-hand control to point to main burner ( ).

The appliance can now be controlled using the left-hand

control knob.

2.9 Turn the left-hand control knob to point to low flame ( ),

the main burner lights on low. The burner can now be

controlled between low and high settings. Turn the control

knob anticlockwise to increase the flame height and

clockwise to decrease the flame height.

THE YELLOW FLAMES WILL APPEAR WHEN THE

APPLIANCE HAS REACHED SUFFICIENT HEAT -

TYPICALLY 10 TO 20 MINUTES.

IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN

USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO

RE-LIGHT THE APPLIANCE.

3. TURNING THE APPLIANCE OFF

3.1 To turn the appliance off, locate the control valve, turn the

left-hand control knob until it points to off ( ). The main

burner goes out leaving the pilot burning.

3.2

To turn the pilot off, locate the control valve, turn the right-

hand control knob until it points to off ( ), the pilot goes out.

4. UPGRADING YOUR APPLIANCE

The appliance is fitted with a control valve that can be

upgraded to support a battery powered remote control.

Two types of remote control can be obtained through your

local Gazco stockist:

4.1 The Standard Remote Control (Gazco Part No. 8455)

controls the gas appliance after the pilot is lit so you can

regulate the main burner through its range of settings and

turn the burner off leaving just the pilot lit.

4.2 The Thermostatic and Timer Remote Control (Gazco Part

No. 8456) controls the appliance after the pilot is lit using

three modes:

—Manual Mode – used to turn the burner on and off and

regulate it through its range of settings.

—Auto Mode – used to turn the burner on and off and

regulate the heat to a pre-set temperature.

—Timer Mode – used to turn the burner on and off at two

pre-set times and regulate the heat to a pre-set

temperature during those periods.

5. ADVICE ON HANDLING AND DISPOSAL

OF FIRE CERAMICS

The fuel effect and side panels in this appliance are made

from Refractory Ceramic Fibre (RCF), a material which is

commonly used for this application.

Protective clothing is not required when handling these

articles, but we recommend you follow normal hygiene

rules of not smoking, eating or drinking in the work area

and always wash your hands before eating or drinking.

To ensure that the release of RCF fibres are kept to a

minimum, during installation and servicing a HEPA filtered

vacuum is recommended to remove any dust accumulated

in and around the appliance before and after working on it.

When servicing the appliance it is recommended that the

replaced items are not broken up, but are sealed within

heavy duty polythene bags and labelled as RCF waste.

RCF waste is classed as stable, non-reactive hazardous waste

and may be disposed of at a licensed landfill site.

Excessive exposure to these materials may cause temporary

irritation to eyes, skin and respiratory tract; wash hands

thoroughly after handling the material.

6. CLEANING THE APPLIANCE

Allow the appliance to cool thoroughly to avoid risk of

burns.

NOTE: THE CAST IRON DOOR IS HEAVY, TAKE

EXTREME CARE WHEN HANDLING.

USER INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gazco Clarendon - coal Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info