Bedienungsanleitung Gazco Riva VISION LARGE 8000 series Conventional Flue (Seite 5 von 32) (Englisch)

813419

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

USER INSTRUCTIONS

2.1 SWITCHING BETWEEN MODES

Press the SET button to change to Temperature Mode

Press again to change to Timer Mode.

Keep pressing to run through all operating modes. These

are:

– MAN

– DAY TEMP

– NIGHT TEMP

– TIMER

and back to MAN

NOTE: MAN mode can also be reached by pressing

either the UP or DOWN button.

2.2 MAN MODE

Press the OFF button and the UP button simultaneously.

You hear several clicks and audible beeps as the fire begins

the ignition process, (up to 30 seconds).

Turning the appliance Off

Press the OFF button to turn the appliance off.

FOR SAFETY, YOU MUST WAIT 30 SECONDS BEFORE

LIGHTING THE FIRE AGAIN.

INCREASE FLAME HEIGHT

Press the UP button once to increase flame height one

stage. Press and hold the UP button to increase to

maximum.

DECREASE FLAME HEIGHT

Press the DOWN button once to decrease flame height

one stage. Press and hold the DOWN button to decrease to

minimum. At the lowest point the fire goes to 'Standby

Mode' (Only Pilot lit).

NOTE: While pressing a button a symbol indicating

transmission appears on the display. The receiver

confirms transmission with a sound signal.

2.3 TEMP MODE (AUTOMATIC)

The display shows the current room temperature.

To increase or decrease the fire’s output:

– Press the SET button to select either the DAY TEMP

or the NIGHT TEMP mode by briefly pressing the

SET button.

– Hold the SET button until the TEMP display flashes and

then let go.

– Set the desired temperature with the UP and DOWN

arrows. (Minimum temperature 5C, maximum 40C or

40F to 99F when Fahrenheit is the preferred option)

– Press the OFF button to stop the display flashing or wait

to return to TEMP mode.

NOTE: If you set a temperature that is beneath the

current room temperature, the fire automatically

switches to PILOT (Stand by).

NOTE: If you would like the NIGHT temperature control

to turn off then decrease the temperature until [--] is

displayed.

2.4 TIMER MODE (AUTOMATIC)

There are two programmable settings you can make over a

24 hour period, P1 and P2. These are normally used to

provide an early morning and evening setting for each

working week:

P1 + = Start Timed Setting 1

P1 + = End of Timed Setting 1

P2 + = Start Timed Setting 2

P2 + = End of Timed Setting 2

2.4.1 P1 - Program 1 for a Timed Setting

Press the SET button until the TIMER mode is displayed.

Hold the SET button. The displays flashes the current time

for P1. While the time displayed is flashing you can alter

the hours and minutes set.

To set the time your fire first lights, change P1

– Press the UP button to alter the hour.

– Press the DOWN button to alter the minutes

in 10 minute increments.

Press SET again to move to the end setting for

P1 This is the time your Riva first shuts down:

– Press the UP button to alter the hour.

– Press the DOWN button to alter the minutes.

2.4.2 P2 - Program 2 for a Timed Setting

Use the same steps outlined in 2.4.1 to change the setting

for P2.

If you have already set P1 and want to alter the setting for

P2 only:

– Press the SET button until TIMER mode is displayed

– Hold the SET button until the display flashes the

current time for P1

– Press the SET button once again to scroll past the settings

for P1 and P1

With the time still flashing:

– Press the UP button to alter the hour

– Press the DOWN button to alter the minutes

Once all four times are set press the OFF button.

2.4.3 To view existing settings:

– Select Timer Mode.

– Press and briefly hold the SET button you see the start

time for P1.

– Repeat the above step for the start and end of each

program.

2.5 LOW BATTERY

“BATT” is displayed on the remote when its batteries need

replacement.

2.6 SETTING THE TIME

– Simultaneously press the up and down buttons.

– Press the up button to set the hour and the down button

to set the minutes/

– Press OFF to return to the manual mode or simply wait.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gazco Riva VISION LARGE 8000 series Conventional Flue Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info