Bedienungsanleitung Gazco Steel Manhattan Log Conventional (Seite 6 von 32) (Englisch)

813401

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

5.2 Remove the 8 screws holding the glass frame, see Diagram 3.

Take care to support the glass when removing the screws.

5.3 Remove the glass frame and place carefully to one side.

5.4 Carefully remove the ceramic fuel bed components and set

aside. Protect the floor coverings and follow the advice

given in Section 6.

5.5 The logs should not require cleaning. Do not use a vacuum

cleaner or brush to clean the logs. Any large pieces of

debris may be removed by hand.

5.6 Ensure any debris is removed from the burner ports.

5.7 Replace the ceramics, see Section 6.

5.8 Ensure that the rope seal on the back of the glass frame is

intact. Replace the glass frame and tighten the 8 screws,

see Diagram 3.

5.9 Offer the decorative steel trim to the opening, inserting the 2

tags on the bottom of the trim behind the bottom panel. Lift

the top of the trim up and hook the lugs on the back of the

trim over the top of the glass frame, see Diagram 4.

NEVER OPERATE THE APPLIANCE WHEN THE GLASS

FRAME IS REMOVED, OR THE GLASS IS BROKEN.

5.10 Replace ALL of the securing screws ensuring that a screw is

present in all fixing slots.

UNDER NO CIRCUMSTANCES SHOULD THE

APPLIANCE BE USED IF ANY OF THE FRAME

RETAINING SCREWS ARE LOOSE OR MISSING.

User Instructions

5.11 Use a damp cloth to clean the outer casing of the appliance.

6. Arrangement of Fuel Bed

Advice on handling and disposal

of fire ceramics

The fuel effect and side panels in this appliance

are made from Refractory Ceramic Fibre (RCF), a

material which is commonly used for this

application.

Protective clothing is not required when

handling these articles, but we recommend you

follow normal hygiene rules of not smoking,

eating or drinking in the work area and always

wash your hands before eating or drinking.

To ensure that the release of RCF fibres are kept

to a minimum, during installation and servicing a

HEPA filtered vacuum is recommended to

remove any dust accumulated in and around the

appliance before and after working on it. When

servicing the appliance it is recommended that

the replaced items are not broken up, but are

sealed within heavy duty polythene bags and

labelled as RCF waste.

RCF waste is classed as stable, non-reactive

hazardous waste and may be disposed of at a

licensed landfill site.

Excessive exposure to these materials may

cause temporary irritation to eyes, skin and

respiratory tract; wash hands thoroughly after

handling the material.

7. Log Layout

7.1 Remove the decorative trim and glass frame, see Section 5.

WARNING: NEVER CLEAN THE APPLIANCE WHILE

IT’S HOT. THE APPLIANCE STAYS HOT FOR A

LONG TIME AFTER SHUTDOWN.

IMPORTANT: THE OUTER PANELLING AND

DECORATIVE TRIM OF THE APPLIANCE ARE MADE

FROM STEEL. TAKE CARE WHEN INSTALLING,

REMOVING AND STORING TO AVOID DAMAGING

THE OUTER CASING, HEARTH OR DOOR.

The fuel bed consists of 5 logs and 2 ash panels. The logs

have letters A,B,C,D and E moulded into them for

identification.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gazco Steel Manhattan Log Conventional Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info