Bedienungsanleitung Gazco Studio Freestanding Balanced Flue (Seite 5 von 52) (Englisch)

813412

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

WARNING: IF THE APPLIANCE FAILS TO LIGHT OR

BECOMES EXTINGUISHED IN USE, WAIT 3

MINUTES BEFORE ATTEMPTING TO RELIGHT.

2.2 There are 3 different modes available for controlling and

operating the appliance:

1. Manual Mode

2. Temp Mode (Automatic)

3. Timer Mode (Automatic)

2.3 In MANUAL MODE you can:

— turn on the main burner using the UP button

— regulate the flame from high to low and back

— turn off the burner leaving just the pilot burning

In TEMP MODE (Automatic) you can:

— set the room temperature so the thermostat in the

remote automatically maintains that temperature

In TIMER MODE (Automatic) the fire:

— turns on and off according to the set time periods

— automatically regulates the room temperature during the

set periods

NOTE: When operating the fire in Temp or Timer

mode, the pilot remains lit and the fire then

automatically switches on at programmed times to

bring the room to the set temperature whether or not

you are in the room.

NEVER LEAVE ANY COMBUSTIBLE MATERIALS

WITHIN 1 METRE OF THE FRONT OF THE

APPLIANCE.

Switching Between Modes

2.4 Press the SET button to change to Temperature Mode.

Press again to change to Timer Mode.

Keep pressing to run through all operating modes. These

are:

— MAN

— DAY TEMP

— NIGHT TEMP

— TIMER

and back to MAN

NOTE: MAN mode can also be reached by pressing

either the UP or DOWN button.

Manual Mode

2.5 Press the OFF button and the UP button simultaneously.

You hear several clicks and audible beeps as the fire

begins the ignition process, (up to 30 seconds).

Turning the appliance Off:

Press the OFF button to turn the appliance off.

FOR SAFETY, YOU MUST WAIT 30 SECONDS BEFORE

LIGHTING THE FIRE AGAIN.

Increasing the Flame Height:

Press the UP button once to increase flame height one

stage. Press and hold the UP button to increase to

maximum.

Decreasing the Flame Height:

Press the DOWN button once to decrease flame height

one stage. Press and hold the DOWN button to decrease to

minimum. At the lowest point the fire goes to 'Standby

Mode' (Only Pilot lit).

NOTE: While pressing a button a symbol indicating

transmission appears on the display. The receiver

confirms transmission with a sound signal.

Temp Mode (Automatic)

2.6 The display shows the current room temperature.

To increase or decrease the fire’s output:

Press the SET button to select either the DAY TEMP or the

NIGHT TEMP mode by briefly pressing the SET button.

Hold the SET button until the TEMP display flashes and

then let go.

Set the desired temperature with the UP and DOWN

arrows. (Minimum temperature 5C, maximum 40C or 40F to

99F when Fahrenheit is the preferred option).

Press the OFF button to stop the display flashing or wait

to return to TEMP mode.

NOTE: If you set a temperature that is beneath the

current room temperature, the fire automatically

switches to PILOT (Stand by).

If you would like the Night temperature control to turn

off then decrease the temperature until [--] is displayed.

Timer Mode (Automatic)

2.7 There are two programmable settings you can make over a

24 hour period, P1 and P2. These are normally used to

provide an early morning and evening setting for each

working week:

P1 + = Start Timed Setting 1

P1 + = End of Timed Setting 1

P2 + = Start Timed Setting 2

P2 + = End of Timed Setting 2

2.8 P1 - Program 1 for a Timed Setting

Press the SET button until the TIMER mode is displayed.

Hold the SET button. The displays flashes the current time

for P1. While the time displayed is flashing you can

alter the hours and minutes set.

To set the time your fire first lights, change P1 :

— Press the UP button to alter the hour

— Press the DOWN button to alter the minutes in 10

minute increments

Press SET again to move to the end setting for P1 This is

the time your Studio first shuts down:

— Press the UP button to alter the hour

— Press the DOWN button to alter the minutes

User Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gazco Studio Freestanding Balanced Flue Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info