Bedienungsanleitung Geba Tronic TCS - Cody 1-2 (Seite 3 von 4) (Englisch)

544881

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Program 2

Input / Clearing of a pass code

Input 8-digit

master code

Input 4- or 5-digit

pass code

Sound

signal

2 x long

Push key

button

Push key

button

Input of 2-digit

memory location

e.g. 07 or 28

Sound signal

1 x long

Sound signal

1 x short

Push key

button

The pass code entered is now stored at the memory

location selected and connected to the fixed output !

With this procedure you can allocate 50 different

pass codes to the memory locations 00-49 !!

Description of the appliance

The TCS-Cody consists of a decoder and a keyboard. The units are connected by a simple

double-wire cable without a special plug. Programming of the TCS-Cody is possible with the

keyboard and the master code.

Master

code:

The master code is an 8-digit numeral code necessary for all programming procedures.

Only after the input of this code the appliance can be programmed according to your per

sonal needs. TCS-Cody is preset by the company with the master code 12345678.

Pass

code:

The pass code is either a four- or five-digit numeral code, by which you operate your door

drive unit. You have the possibility to store up to 50 different pass codes, which means

that up to 50 different persons with different pass codes can open the door. If you are

accompanied by another person when entering your pass code you can first press as many

keys as you like before you finally enter your code. This ensures that no other person can

notice your pass code, but the TCS-Cody recognizes your pass code as correct!

The TCS-Cody is preset by the company with the pass code 1234 on memory location 01.

ATTENTION!!!

After you have made yourself familiar with the functions of the appli

ance, please program your personal master code as well as a pass

code with which you replace the pass code which is located on the

memory place 01. Only by this your TCS-Cody is protected against

manipulation!

TIPT

OMATIC

Especially for garage doors the TCS-Cody is designed with TIPTOMATIC-timing. After

input of a pass code and within a period of 60 seconds this function allows to control the

door with any key, except for the button, and without the need to enter

the pass code once again. This isolating facility can, however, be interrupted prior to

the expiration of the 60 seconds, by pressing the button.

Lock-out

function:

If the lock-out function is activated the the TCS-Cody automatically blocks for 10

seconds after the input of a wrong pass code which is signalled with a double

sound signal. By choice, you can arrange that the lock-out time can be doubled after

any wrong input until a correct pass- or master code is entered.

The end of the blocking time is signalled by a long sound signal.

Fix output

Actuate key

or key

industial controls

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Geba Tronic TCS - Cody 1-2 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Geba Tronic TCS - Cody 1-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info