Instructions for Assembly and Use
TCS-Cody 2
Electronic encoder-type lock
The TCS-Cody is a modern and safe alternative to traditional key switches. The
TCS-Cody can safely be used after two simple programming steps (master code
and pass code). For opening or closing of the door only a four- or five-digit nume-
ral code (pass code) has to be entered, which has been previously programmed via
the master code by an authorized person.
After correct input of the pass code and actuation of arrow keys UP▲ or DOWN ▼
the drive UP or DOWN is triggered by the corresponding relay contact.
The high flexibility of the encoder is achieved by extensive programmability of the
individual operating functions. All sections required for operation are, however, pre-
programmed and thus immediately ready for use.
Technical Data:
24 V series 230 V series
Supply voltage 12 - 24 V AC / DC 230 V AC 50 Hz
Output 2x NO, NC relay contacts, 2x NO, NC relay contacts,
isolated, 8 A 250 V isolated, 8 A 250 V
Connections 2.5 mm
2
max., 2.5 mm
2
max.,
Ambient- -20 ˚C to +60 ˚C -20 ˚C to +60 ˚C
temperature
Adaptation of the TCS-Cody 2 to special requirements:
The TCS-Cody 2 is provided with a series of flexible time settings which allow the adaptation
to special cases of application. For programming these special operating modes please ask
for our flow chart for the TCS-Cody series, if required!
geba GmbH is released of its obligations regarding guarantee and product liability if - without
prior permission - the unit has been modified, or if the installation is unproper or not in accordan-
ce with our instruction manual.
The installer has to take care that the EMC-regulations are respected.
GB
The most important characteristics of the TCS-Cody are:
➢ Simple operation, programming and assembly.
➢ Water-protected enclosure
➢ A maximum of safety:
➢ The electronic decoder is separately installed in the
protected area
➢ Up to 50 different pass codes can be stored
Up to 100 million different coding possibilities
Variable lock-out function
Nearly unlimited data security, even with power failure
➢ Two potential-free relay outputs
After entry of a valid pass code and within 30 seconds the user can
control the drive unit connected in dead man‘s operation by means of
arrow keys ”UP” ▲ and ”DOWN” ▼.
➢ High switching capacity for direct control of appliances
