Bedienungsanleitung Geba Tronic TCS-Cody 3 (Seite 3 von 4) (Englisch)

544625

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Description of the appliance

The TCS-Cody consists of a decoder and a keyboard. The units are connected by a simple

double-wire cable without a special plug. Programming of the TCS-Cody is possible with the

keyboard and the master code.

Attendance/Function:

The TCS-Cody 3 has three potential free relay-outputs enabling direct control of a tubular

drive or an industrial door drive unit or similar instruments. After having entered a valid pass

code the user can, within a period of 30 seconds, trigger the installed drive unit in the dead

man’s mode with the arrow-keys “UP“ ▲ and “DOWN“ ▼. The relay is activated only as long

as the arrow-keys are pushed. The two relays are interlocked against each other, so it is not

possible that both relays can be attracted at the same time. After expiration of the enable

time of 30 seconds the TCS-Cody locks automatically. The appliance can, however, also be

blocked intentionally within the enable time by pushing the “STOP“ key. The enable time is

freely programmable and can be changed according to the individual demands, if required.

Master

code:

The master code is an 8-digit numeral code necessary for all programming procedures.

Only after the input of this code the appliance can be programmed according to your

personal needs. TCS-Cody is preset by the company with the master code 12345678.

Pass

code:

The pass code is by choice a four- or five-digit numeral code, by which you operate your

door drive unit. You have the possibility to store up to 50 different pass codes, which means

that up to 50 different persons with different pass codes can open the door. In case you

are accompanied by another person when entering your pass code you can at first press

as many keys as you like before you finally enter your code. This ensures that no other

person can notice your pass code, but the TCS-Cody recognizes your pass code as

correct! The TCS-Cody is preset by the company with the pass code 1234 on memory

location 01.

ATTENTION!!!

After you have made yourself familiar with the functions of the appli

ance, please program your personal master code as well as a pass

code with which you replace the pass code which is located on the

memory place 01. Only by this your TCS-Cody is protected against

manipulation!

Lock-out

function:

If the lock-out function is actuated the TCS-Cody automatically blocks for 10 seconds

after the input of a wrong pass code which is signalled with a double sound signal.

By choice, you can arrange that the lock-out time can be doubled after any wrong input

until a correct pass- or master code is entered. The end of the blocking time is signalled

by a long sound signal.

Program 2

Input / Clearing of a pass code

Input 8-digit

master code

Input 4- or 5-digit

pass code

Sound

signal

2 x long

Push key

button

Push key

button

Input of 2-digit

memory location

e.g. 07 or 28

Sound signal

1 x long

Sound signal

1 x short

Push key

button

The pass code entered is now stored at the memory

location selected and connected to the fixed output !

With this procedure you can allocate 50 different

pass codes to the memory locations 00-49 !!

industial controls

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Geba Tronic TCS-Cody 3 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Geba Tronic TCS-Cody 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info