Bedienungsanleitung Wellis Easy 7 (Seite 88 von 108) (Englisch)

784849

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

CHEMICAL TREATMENT DEVICE

THINGS TO KNOW ABOUT THE ASIN AQUA

The CHEMICAL TREATMENT device provides pure sparkling

water that contains only a minimal amount of chemical

substances. This system directly measures and monitors

free chlorine content and the redox potential of the spa

water. The CHEMICAL TREATMENT device regulates the

spa water while using only a minimal amount of chlorine,

thus eliminating the strong smell of overtreated water. The

touch screen solution allows you to attentively monitor the

measuring units and regulations of your spa. The CHEMICAL

TREATMENT device uses the current filtration equipment of

the spa and works with a timed dosing system and even with

chlorine-free oxygen based disinfection.

HEALTH AND SAFETY

The CHEMICAL TREATMENT device makes it possible to

adhere to the rules of hygiene in regards to the physical and

chemical demands concerning the spa water’s quality.Do not

open the casing of the CHEMICAL TREATMENT device and

do not change any of its internal parts. Opening the casing

voids the warrantyThe chemicals used by the CHEMICAL

TREATMENT device can only be used in safe conditions to

avoid damage or personal injury. Always use personal protec-

tive equipment (safety goggles and gloves) when handling

pH or chlorine substances. For further information consult

your Chemical Safety Data Sheet.

INSTALLING THE CHEMICAL TREATMENT DEVICE

Install the CHEMICAL TREATMENT device in an environment

free of dust and high humidity. Secure your device on the

wall in a way that leaves at least 30cm of empty space on

either side.

To connect your CHEMICAL TREATMENT device to the water

supply provides a special Speedfit quick connector. To con-

nect push the plastic pipe into the Speedfit quick connector.

To remove the pipe from the quick connector push in the

collet and pull the pipe out.

1. Cut off the plastic pipe at a 90-degree angle to ensure

proper connection. Use a sharp knife or blade for precise

cutting.

2. Connect the water intake on the left and the water outlet

on the right. Ensure that the water pressure does not go

over the 1,5 bar value.

3. The water outlet of the CHEMICAL TREATMENT device can

be connected to the plumbing, before the pump, to the

skimmer, the buffer tank, or the drain pipe.

DISCONNECTING

After connecting to the water supply your ASIN Aqua device

is able to take samples of the spa water and analyze them.

Analysis makes monitoring of chlorine levels and pH values

possible, ensuring the spa's hygiene.

Adjusting the spa’s parameters Every spa represents a unique

solution. Temperature, size, location, and water hardness

all affect the ability of the CHEMICAL TREATMENT device to

monitor and regulate the water of your spa. To reach maximal

performance the CHEMICAL TREATMENT device must be

adjusted to your spa’s characteristics. After selecting the

REQUIRED VALUES menu item:

1. Adjust the filtration parameters of the spa.

2. Adjust the parameters of the water. Adjusting the filtration

parameters The CHEMICAL TREATMENT device must know

the spa's size and filtration cycles. When installing the

CHEMICAL TREATMENT device you must define these spa

parameters:

A.) Choose the SETTINGS menu item on the start screen,

then press the PARAMETERS item to get to the next

screen.

B.) Choose the spa PARAMETERS item

C.) Choose the spa VOLUME menu item.

Your choice is shown by a black triangle. Check the spa’s data

sheet for its volume. (1000L =1m3) Press the + and - buttons

to enter the appropriate spa value, then press OK to save.

Note: If the volume of your spa is between 1000 and 1500 liters,

select 1 m3. If it is between 1500 and 2000 liters, select 2 m3.

D.) Choose the desired disinfection timeframe and press

OK to save. Your choice is shown by a black triangle

at the bottom. The displayed number shows the time-

frame of the disinfection cycle, not its frequency.

OPTIONAL ACCESSORIES  CHEMICAL TREATMENT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wellis Easy 7 Seite 88

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wellis Easy 7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info