Bedienungsanleitung Wellis W2000 (Seite 90 von 108) (Englisch)

784857

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

THE FIRST CLF CALIBRATION

Using the provided Aseko test kit to manually check the

chlorine level of your spa by taking a sample from the output

stream of spa water.

In the main menu of the CHEMICAL TREATMENT device select

SETTINGS, then the CALIBRATION menu item.

Select the yellow chlorine box on the left of the screen. If the

probe is broken or has any other malfunction, you will receive

the following notification.

Compare the data shown by the CHEMICAL TREATMENT

device with the results of the manual measurement. If there

is a difference, adjust the values shown by the CHEMICAL

TREATMENT device with the + and - buttons until they match

the manual results, then select OK to save.

If the chlorine level data of the manual test matches the

readings of the CHEMICAL TREATMENT device, your probe

measures chlorine level accurately.

SUGGESTION:

Measure the chlorine level of your spa weekly.

SAFETY FUNCTIONS:

The CHEMICAL TREATMENT device has safety functions that

prohibit overdosage of the spa. The device uses the follow-

ing safety functions:

– Maximal safety dosage

– Overly fast change in the pH value

– Dosing without probe reading

If you adjust the parameters of the water appropriately, the

CHEMICAL TREATMENT device calculates the maximum

hourly dosage of the disinfectant. Thanks to this function

overdosage is highly improbable.

The maximal safety dosage moves between 1 and 11 ml/m3/

hour. In extreme conditions the value rises to 25 ml/m3/hour.

Overly fast change in the pH value

can be caused by heavy rain, adding large amounts of water,

or inordinate usage. If any of these occur the CHEMICAL

TREATMENT device shuts down dosage of the pH medium

for 2 hours and only restarts it when the pH value stabilizes.

Change in the pH value without a probe reading.

Depending on the water hardness the CHEMICAL TREAT-

MENT device reports an error and shuts down dosage of the

pH agent.

– From soft to moderately hard < 9°dH.

If there is no change in the pH value, the ASIN Aqua device

shuts down dosage of the pH agent after 10 doses.

– Hard 9–21°dH.

If there is no change in the pH value, the ASIN Aqua device

shuts down dosage of the pH agent after 15 doses.

– Extra hard > 21,01°dH.

If there is no change in the pH value, the ASIN Aqua device

shuts down dosage of the pH agent after 25 doses.

WARNING! Never mix the pH agent with a chlorinated

substance. Always prevent mixing of the pH agent with a

chlorinated substance by rinsing whenever you are performing

maintenance on the plastic cleaning pipes or valves.

WARNING! Always ensure that the spa water is chemically

clean and uncontaminated before setting up your CHEMICAL

TREATMENT device.

When setting up the CHEMICAL TREATMENT device ensure

that it is no more than 8 meters far from the point where the

chemicals connect to the spa’s water supply.

When setting up the ASIN Aqua device ensure that there are no

more than 2 vertical meters between the wall mount and the

point where the chemicals connect to the spa’s water supply.

WARNING! Usage of pliers and wrenches damages the tube and

causes fitting problems.

WARNING! This parameter affects the maximum hours duration

of the disinfection process.

WARNING! The filtration time frame should be set as the daily

operating time of the CHEMICAL TREATMENT device.

WARNING! This parameter affects the maximum hours duration

of the disinfection process.

WARNING! These parameters affect the maximum hours dura-

tion of the disinfection process.

pH CALIBRATION

WARNING! Probes do NOT require calibration most of the

time. We authenticate the pH probe of the CHEMICAL TREAT-

MENT device at the factory.

If you do not let the probes stabilize in the water before the

calibration and usage of the system, we cannot guarantee

proper function of the CHEMICAL TREATMENT device. Check

the pH calibration once a year and change the probe if

needed.

OPTIONAL ACCESSORIES  CHEMICAL TREATMENT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wellis W2000 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wellis W2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info