Bedienungsanleitung Geemarc CL7350 Opti (Seite 1 von 2) (Englisch)

762359

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite



1 2

QUICK USER GUIDE

!!! Please refer to our website: www.geemarc.com for an up to date user guide,

as there may be important updates and changes you need to be aware of !!!

PACK COMPONENTS

Description

Headset Receiver

FRONT REAR

Function Identification: Charging Cradle

INTRODUCTION

The Geemarc Wireless Audio Listener is an audio amplification system specifically

designed for people with hearing difficulties.

The Geemarc Audio Listener can be used with all kinds of audio systems for

interference - free listening enjoyment – TV set, Smartphone, DVD player, CD

player, Hi-Fi system, etc.

Audio output from a TV or audio device is transmitted by the Charging Cradle, the

wireless receiver receives the signal and amplifies the audio sound for the listener.

● The listener’s comfort and long-term enjoyment has been built into every feature

of the Geemarc Wireless Audio Listener:

● Rich, adjustable audio quality:

o Broad audio bandwidth;

o Adjustable bass, treble and balance to compensate for hearing loss.

● Up to 25 meters transmit-receive range keeps you within hearing distance all over

the house and garden;

● Auto-tune button on your Receiver–tune in for the best sound exactly where you are;

● Listen and keep in touch with your surroundings:

o Multiple Receivers can be paired with one Charging Cradle;

o Single-touch Mute function switches the Audio Listener into a conversation assistant

enabling you to talk with and listen to the people around you with the receiver on,

taking advantage of its built-in audio amplifier to hear everything better.

● Up to 6 hours of rechargeable battery life per full charge – never lose the soundtrack

in mid-program;

● Only 3 hours to fully recharge the Receiver simply by replacing the Receiver in its

Charging Cradle.

INSTALLATION

Transmitter

(D1) Connect the Power Supply to the DC IN Socket located on the Charge Cradle

rear panel.

(D2) Connect the Power Supply to an electricity socket (100-240V~50/60Hz).

(D3) Connect one end of the Optical Cable to the rear panel of the Charge Cradle.

(D4) Connect the other end of the Optical Cable to your Audio Source (e.g. TV set,

Hi-Fi system) with Optical Output.

(D5) Accessories for items (D5) and (D6) in above drawing are not provided in the

pack components.

(D6) If your Audio Source does not have an optical socket, then use one of the following

Adapters (not provided in the pack components) that connects to the Audio In of

the Transmitter.

• 3.5mm to 3.5mm Audio Cable • 3.5mm to 6.3mm Adapter Plug

• RCA Adapter Cable • SCART Adapter

(D7) On the rear panel of the Charging Cradle, switch the Power ON/OFF Switch to

ON. The green Power Indicator LED will glow immediately.

When the audio signal is detected from the Audio Source, the Green LED Signal

Indicator will glow constantly.

OPERATION

Initial Operation

1.Make sure the CL7350 is

plugged into the mains supply.

2.Switch ON the CL7350–on the

rear of the Charging Cradle

(see figure (1)).

3.Place the TV Receiver in the

Charging Cradle for at least

three hours to allow it to fully

charge.

• Make sure the TV Receiver is

switched OFF (see figure (2)).

• The LED Indicator glows red

during charging.

• It will glow green after the

battery is fully charged (see

figure (3)).

4.After three hours have passed

and the charging LED has

turned green, you can proceed

to use the device.

Routine Operation

1. Switch on the Audio Source (TV set or audio device) that the Transmitter is connected

to. The Signal LED Indicator will glow continuously (see figure (4)).

2. Put the Ear Phone plug into the 3.5mm phone jack of TV Receiver. On the TV

Receiver, switch the ON the On/Off Switch (see figure (5)). The green signal LED

Indicator will glow continuously.

3. Adjust the Volume to the desired sound level (see figure (6)), then fit the earbuds

in your ears.

NOTE: Make sure the volume on your Audio Source (TV set or other audio device)

is turned up to at least half of its full volume to get good sound quality in your

Earbuds.

(C1) Charging Pins

(C2) Tone Adjustment

(C3) LED Indicator: Battery

Charge (Red = charging,

Green = fully charged)

(C4) LED Indicator (Green):

Audio Signal

(C5) LED Indicator (Green):

Power

(C6) LED Indicator (Yellow):

Treble enhanced

(C7) LED Indicator (Blue):

Bass enhanced

(C8) Audio In

(C9) Frequency Channel

Selector (CH1 or CH2)

(C10) Optical In Socket

(C11) Power ON/OFF

(

C12

)

DC In Socket

(B1) Earbuds

(B2) Volume Control

(B3) Power/Signal LED

Indicator

(B4) Mute Button for Verbal

Communications

(B5) Microphone

(B6) Auto Tune Button for

Frequency Channel

(B7) Sound Balance Control

(B8) Power On/Off Switch

(B9) Battery Contact

(A1) TV Headset Receiver

(A2) Charging Cradle and

Transmitter

(A3) Power Supply

(A4) Optical Cable

FRONT

REAR

3.5mm headphone

socket

6.3mm headphone

socket

RCA socket

SCART

socket

Optical Jack

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Geemarc CL7350 Opti Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Geemarc CL7350 Opti

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info