Bedienungsanleitung Geemarc Viso 20 (Seite 1 von 2) (Englisch)

762352

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite



123

INSTRUCTION MANUAL

!!!Please refer to our website: www.geemarc.com

for an up to date user guide, as there may be

important updates and changes you need to be

aware of !!!

Cautions:

Precautions and maintenance

z For indoor use only

z To avoid risk of fire or electric shock, do not expose the unit to

moisture or condensation.

z To avoid overheating, do not block the ventilation holes on the

back of the Clock Display.

z Keep the Clock Display out of direct sunlight.

z Do not dismantle the Clock Display. There is a risk of electric

shock and there are no user-serviceable parts inside.

Dismantling the Clock Display will void your warranty.

Cleaning the LCD Screen

z Treat the screen carefully. tThe screen of the Clock Display is

made of glass and can easily be broken or scratched.

z If fingerprints or dust accumulate on the LCD screen, we

recommend using a soft, non-abrasive cloth such as a camera

lens cloth to clean the LCD screen.

z Moisten the cleaning cloth with a cleaning solution and apply the

cloth to the screen.

Introduction:

Thank you for the purchase of the Clock Display. It is designed to

allow you to see the time quickly and easily and any warning

functions displayed.

Please read this User Manual carefully to use the Clock Display

correctly.

Features: Days Clock

Packaging Check List:

z 7 inch Clock Display

z User manual

z Bracket

z AC adapter

1. Product Diagram

1.1 Back side Buttons

1. Menu

2. Exit

3. Vol- / Up / Left / Increase

4. Vol+ / Down / Right / Reducing

5. Play / Pause / OK

1.2 Left side of the Clock Display

DC in “ ” on the left side of the Clock Display.

2. Getting Started

1. Place the Clock Display with installing bracket on a steady flat

position, then plug the AC adapter into a standard 100-240V AC

electrical outlet and the other end into the DC IN slot on the left

side of the Clock Display.

2. Remove the protective film covering the Screen.

3. Hold and Press the MENU button on the backboard to On/Off

Switch.

3. Operating Instruction

When you power the unit on for the first time it will show the

startup logo. Then the main menu will display after a few seconds.

After this the Days Clock will display you can easy see the details

week day, time, month and year on the Clock Display screen, and

they will change automatically.

4.Setting

Press Menu key and select the Setting icon in the main menu.

Press “ ” Button to enter the Setting interface and press

to highlight your selection. Press “ ” Button to enter

the setting value. Then hold and press to set the value.

You can select Style Setup, Set Days-Clock, Calendar Setup,

System Setup, and so on.

4.1. System Setup

Language

Changes the operating language of the photo Clock Display.

Available Values: English, Nederland, Français, Deutsch, Italiano,

Espanol, Hebrew.

Grayscale

Hold and press “ ” or “ ” buttons to select the Gray Scale

level that you require between 1 to 10.

Brightness

Hold and press “ ” or “ ” buttons to select the Brightness

level that you require between 1 to 10.

Contrast

Hold and press “ ” or “ ” buttons to select the Contrast

level that you require between 1 to 10.

Auto power on & off function

Remarks:

1. In order to activate the auto power ON & OFF function, please

check the settings for the Sleep timer and Auto boot Time are

set correctly. If set to OFF, the function is not activated.

2. A reminder for the Auto OFF appears 1 Minute before the frame

switches off. Press any key to cancel the Auto OFF function.

3. If Power OFF is activated and the frame switches off at the

selected time, the frame goes into Sleep-mode. To switch the

frame on again, you need to press and hold the Menu Button at

the rear side of the frame.

Auto Shut Time

Set the auto power off time in the format of “[Hour]:

[Minute]”.Choose System setup/ Auto shut time with . Use

the “ ” or “ ” buttons to switch between fields, hold and

press “ ” or “ ” buttons to change time field values. Keep

the Sleep Timer on.

Auto Boot Time

Set the auto power on time in the format of “[Hour]: [Minute]”.

Choose System setup/ Auto boot time with Use the “ ”

or “ ” buttons to switch between fields, hold and press “ ”

or “ ” buttons to change time field values. Keep Regular Boot

on.

Power Frequency:

You can choose to set the function auto power ON/OFF as follows:

- Workday, Week end, Once, Every day. Use the “ ” or “ ”

buttons to switch between fields, hold and press “ ” or “ ”

buttons to change mode field values.

Firmware Version:

You can check the software version of your Viso 20.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Geemarc Viso 20 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Geemarc Viso 20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info