Bedienungsanleitung Geemarc Viso 30 (Seite 1 von 2) (Englisch)

762353

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite



123

INSTRUCTION MANUAL

!!!Please refer to our website: www.geemarc.com

for an up to date user guide, as there may be

important updates and changes you need to be

aware of !!!

Cautions:

Precautions and maintenance

z For indoor use only

z To avoid risk of fire or electric shock, do not expose the unit to

moisture or condensation.

z To avoid overheating, do not block the ventilation holes on the

back of the Clock Display.

z Keep the Clock Display out of direct sunlight.

z Do not dismantle the Clock Display. There is a risk of electric

shock and there are no user-serviceable parts inside.

Dismantling the Clock Display will void your warranty.

Cleaning the LCD Screen

z Treat the screen carefully. tThe screen of the Clock Display is

made of glass and can easily be broken or scratched.

z If fingerprints or dust accumulate on the LCD screen, we

recommend using a soft, non-abrasive cloth such as a camera

lens cloth to clean the LCD screen.

z Moisten the cleaning cloth with a cleaning solution and apply the

cloth to the screen.

Introduction:

Thank you for the purchase of the Clock Display. It is designed to

allow you to see the time quickly and easily. Please read this User

Manual carefully to learn the correct way to use the Clock Display.

Features: Days Clock

Packaging Check List:

z 9 inch Clock Display

z User manual

z Bracket

z AC adapter

1. Product Diagram

1.1 Back side Buttons

1.2 Left side of the Clock Display

DC in “ ” on the left side of the Clock Display.

2. Getting Started

1. Place the Clock Display with installing bracket in a steady flat

position. Then plug one end of the AC adapter into a standard

100-240V AC electrical outlet and the other end into the DC IN

slot on the left side of the Clock Display.

2. Remove the protective film covering the Screen.

3. Hold and Press the power button on the backboard to turn

On / Off the Viso30.

3. Operating Instruction

When you power the unit on for the first time it will show the

startup logo. Then the main menu will display after a few seconds.

After this the Days Clock will display.

You can easy see the details week day, time, month and year on

the Clock Display screen, and they will change automatically.

4.Setting

Press Menu key and select the Setting icon in the main menu.

Press “ ” Button to enter the Setting interface and press or

to highlight your selection. Press “ ” Button to enter the

setting value. Then press or to set the value.

You can select Style Setup, Set Days-Clock, Calendar Setup,

System Setup, and so on.

4.1. System Setup

Language

Changes the operating language of the photo Clock Display.

Available Values: English, Nederland, Français, Deutsch, Italiano,

Espanol, Hebrew. Use the buttons or to select the language.

Grayscale

Press and buttons to select the Gray Scale level that you

require between 1 to 10.

Brightness

Press and buttons to select the Brightness level that you

require between 1 to 10.

Contrast

Press and buttons to select the Contrast level that you

require between 1 to 10.

Auto power on & off function Remarks:

1. In order to activate the auto power ON & OFF function, please

check the settings for the Auto Shut Time, Sleep timer, Auto

boot Time and Regular Boot are set correctly. If set to OFF,

the function is not activated.

2. A reminder for the Auto OFF appears 1 Minute before the frame

switches off. Press any key to cancel the Power OFF function.

3. If Power OFF is activated and the frame switches off at the

selected time, the frame goes into Sleep-mode. To switch the

frame on again, you need to press the “Power” Button on

the Remote or the rear side off the frame twice.

Auto Shut Off Time

Set the auto power off time in the format of “[Hour]: [Minute]”. In

System setup / Auto shut time. Press button to select. Use

the and buttons to switch between fields. Press or

buttons to change time field values. Press button to validate.

Keep the Sleep Timer on. Press Menu button to exit.

Auto Power On Time

Set the auto power on time in the format of “[Hour]:[Minute]” in

System setup/Auto Boot time. Press button to select. Use

the or buttons to switch between fields. Press or

buttons to change time field values. Press button to validate.

Keep the Regular Boot on. Press Menu button to exit.

Power Frequency:

You can choose to set the function auto power ON/OFF as follows:

- Workday, Week end, Once, Every day. Use the or buttons

to change mode field values.

1. Power on/off

2. Up

3. Right

4. Play / Pause / OK

5. Left

6. Down

7. Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Geemarc Viso 30 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Geemarc Viso 30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info