749280
10
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
GB
10
IMPORTANT: Pull the main power plug from the socket before carrying out
any maintenance tasks on the file shredder!
MAINTENANCE
TECHNICAL DATA
Model: Shredder Home & Office X6 CD
Cut type: Particles Cut
Cut size: 5 x 35 mm (Paper & Credit card) / 3 pieces CD/DVD
Cutting capacity: 6 sheets (DIN A4/80g/m²); 1 CD/DVD; 1 credit card
Cutting speed: 2.25m/Min
In-feed width: 220 mm / 123 mm for CD/DVD
Input voltage: 230 VAC / 50Hz
Power consumption: 280W/1.4 A
Noise level: ≤72dB
Dimensions: 315 x195 x 322 mm
Waste paper container – volume: 13L / 0,8L CD/DVD waste
Operating cycle: 2 min. ON / 40 min. OFF
Net weight: 3,26 kg
When the waste paper container is full, shredded material can be pushed
upwards into the cutting mechanism. Make sure to empty the waste paper
container before it is filled completely.
Clean the exterior of the file shredder with a moist cloth. Ensure that the cloth
is kept well away from the paper feed. This cleaning step is suitable only for
the exterior of the device. The exterior of the device is made of plastic. That is
why no solvents like benzene or benzole, or any organic solvents (e.g. thinner)
may be used to clean the exterior of the device. Never clean the device with a
stain remover - this may cause the casing to fade, crack, dissolve or graze.
CAUTION: Make sure that no water gets into the device while cleaning the casing.
Set the switch to „REV“ position and the machine is ready for cutting CD/
DVDs; put the CD/DVD vertically into the feeder slot; when cutting is finished,
set the slide switch to „OFF“ position.
For a long machine life and for a continuous good shredding function, please
observe the maximum number of sheets per shredding process; shred only
one CD/DVD or credit card at a time.
Continuous use of the machine for a prolonged period of time may cause it to
overheat and stop working. It will resume shredding after cooling down.
Please do not put clips, adhesive paper, adhesive tapes, or clothes into the
paper feeder slot to avoid damaging the blades or lowering the shredding
performance.
Pull the plug before emptying the paper bin or when not using the machine for
a prolonged period of time.
3.
4.
5.
6.
7.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Geha X6 CD Shredder wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info