Bedienungsanleitung Gemini 7024 (Seite 2 von 8) (Englisch)

479873

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

DESCRIPTION DESCRIPTION

Gemini 7024US is a modular alarm unit with ultrasonic sensors; studied to be

installed on vehicles equipped with original central door locking control.

Gemini 7024 is a modular alarm without ultrasonic sensor.

The systems Gemini 7024US and Gemini 7024 can be installed on vehicles (with

diesel or petrol engine) with a 12V battery with negative to earth.

Gemini 7024US.1 like 7024US without electronic keys.

Gemini 7024.1 like 7024 without electronic keys.

FUNCTIONS FUNCTIONS

- Outlet for direction indicator lights - Blinker

- Volumetric and Perimetric protection (only for US models).

- Positive and negative control for vehicles equipped with Pack-comfort system.

- Engine immobilisation.

- Negative control for external supplementary siren.

- Automatic arming and "GARAGE " position function (only for US models).

- Emergency disarming through electronic key (only for 7024 and 7024US).

INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS

- Position the system wiring harness away from high voltage wires in order to avoid interference that may cause

damages to the system.

- On vehicles with a catalytic converter the engine immobilisation must be carried out on the fuel pump.

- If the system is supplied with volumetric sensors (art. 7024US), the transducers must be positioned at the top

of each windscreen pillar and away from the facia outlet.

- Connect the positive feeding of the alarm system to the battery positive terminal and the negative feeding of

the alarm system to the battery negative terminal or to the vehicle frame.

- IMPORTANT: to obtain a correct working of the automatic arming and the perimetrical protection

functions, it is COMPULSORY to connect the GREEN-BROWN wire to the door/boot switches.

- The unit memorises the polarity of the arming and disarming controls from the vehicle 10 seconds

after the alarm feeding. The LED lights fix.

During this period it is possible to carry out only the “Blinker” exclusion.

CONNECTION TO THE RADIO RECEIVER

For vehicles with original positive control receiver, follow the fitting diagram A.

For vehicles with original negative control receiver, follow the fitting diagram B.

For vehicles with codified receiver with single control button, negative to rest, follow the fitting diagram C.

For vehicles with codified receiver with a double control button, negative to rest, follow the fitting diagram

For vehicles with codified receiver with button or control button free to rest, follow the fitting diagram E.

For vehicles with codified receiver and central door locking closure control supplied with alarm connection,

follow the fitting diagram F.

NOTE: FOR THE DIAGRAMS OF THE VEHICLES ASK TO THE CAR DISTRIBUTOR OF THE AREA.

ULTRASONIC SENSOR ADJUSTMENT( only for 7024US)

The ultrasonic sensor adjustment is carried out while alarm armed with the sensor exclusion

function activated.

- Put the electronic key in the socket, the LED flashes for one second.

- Arm the alarm system with the vehicle original transmitter. The arming is signalled by 2

pulses of the direction indicator lights. Wait the end of the inhibit time.

- Put one hand in the vehicle and move it. The sensor detects the movement without triggering

the alarm; the LED switches on. If the LED does not switch on increase the sensitivity (fully

clockwise) and repeat test.

WIRING CONNECTIONS

(DISCONNECT THE NEGATIVE BATTERY TERMINAL AND RE-CONNECT AFTER THE INSTALLATION IS COMPLETE).

FUNCTIONS WIRES COLOUR

Earth ðð

BROWN

Battery positive ðð

RED

Engine immobilisation (Max 8A) ðð

2 x GREY

Ignition live ðð

YELLOW

Direction indicator lights ðð

2 x ORANGE

Door pin switches ðð

GREEN-BROWN

Boot pin switch ðð

GREEN

Sensors inlet ðð

GREEN-BLACK

Positive alarm armed ðð

PINK

Self-powered siren control ðð

BLUE

Sel. alternative or continuous sound ðð

BLACK (10cm.)

Additional siren/horn control ðð

YELLOW-BLACK

Negative comfort control ðð

WHITE-BLACK

Positive comfort control ðð

RED-BLACK

Selection for automatic activation ðð

YELLOW-GREEN (10 cm.)

Arming/disarming control

Refer to diagrams A, B, C, D, E, F.

ðð

YELLOW-RED, BROWN-RED,

YELLOW-BLUE WHITE-L. BLUE,

GREEN-BLUE.

NOTE: connect the 2- pin connectors of the wiring harness to the electronic key socket connectors

(only for US models).

WORKING DESCRIPTION WORKING DESCRIPTION

- ALARM ARMING WITH THE ORIGINAL TRANSMITTER : press on the original transmitter button while

closing the doors of the vehicle. The arming is signalled by one pulse of the direction

indicator lights if the visualisation is not excluded.

- ALARM ARMING WITH THE EXCLUSION OF THE ULTRASONIC AND EXTERNAL SENSORS (US MODELS):

put the electronic key in the appropriate socket before arming the alarm system. The arming

is signalled by 2 pulses of the direction indicator lights if the visualisation is not excluded.

Note: the sensor exclusion is obtained also with the function of automatic arming activated.

- ALARM DISARMING: press on the transmitter’s button at the same time of the vehicle’s door

opening. The disarming is signalled by 3 pulses of the direction indicator lights; 5 pulses if an

alarm condition has occurred (if the visualisation function is not excluded).

- ALARM DISARMING THROUGH THE ELECTRONIC KEY (ONLY FOR 7024 AND 7024US): to obtain this

function put the electronic key in the appropriate socket. The disarming is signalled by 3

pulses; 5 pulses if an alarm condition has occurred (if the visualisation function is not

excluded).

Gemini 7024 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info