PAGE 02
1.0 - PRELIMINAR ADVICE
Dear Customer t
.
same as 933 without self-powered battery
:
GEMINI 932:
e present manual illustrates the most fully featured alarm system; not all functions,
electrical connections etc. will therefore apply to all models.
Before installing, identify your alarm model and refer to it for the correct instructions
The following signs, intended for the installer or the user indicate particular functions or connections
as follows
USER MANUAL - PAGE 03
T
For the installer
This sign indicates that the system will work according to the connections and the
programming selected or it simply provides useful installation tips.
!
For the user
This sign highlights useful information.
UK
1.0
2.0
4.0
5.0
6.0
7.0
8.0
14.0
15
16.0
17.0
- PRELIMINARY ADVICE.............................................................................................
- OPERA
2.1 - Complete system arming..........................................................................................
2.2 - System arming with sensor and comfort control exclusion.......................................
2.3 - Passive arming.........................................................................................................
2.4 - Arming inhibit time....................................................................................................
2.5 - System armed..........................................................................................................
2.6 - Alarm, inhibit time between alarms and alarm cycles...............................................
2.7 - System disarming.....................................................................................................
2.8 - Emergency disarming by electronic key
2.9 - Alarm memory
W ...................................
- W AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE.......
- CONNECTORS T
5.1 - 20-way connector
5.2 - 8-way connector
- COMPLETE ELECTRIC DIAGRAM...........................................................................
-C ............
..........................................................................................
..........................................................
7.3 - Connection to hazard push-button...........................................................................
- SELECTION OF CONNECTIONS T ARM/DISARM THE SYSTEM........................
..........................
..............................................
8.3 - Connections to turn indicators..................................................................................
8.4 - “Mixed” connection option........................................................................................
SYSTEM PROGRAMMING.............. ....................................
.....................................................................................
.........................................................................
1
1 5) ........................................................................
1
1
1 ................
..............................................
ADDING NEW DEVICES..........................................................................................
- DELETING PROGRAMMED DEVICES...................................................................
..........................................................
..........................................................................
..........................................................................................
- SYSTEM RESET
- TECHNICAL SPECIFICA
USER MANUAL
INST
3.0
9.0
10.0
1
12.0
13.0
.0
- .....................................................
ONNECTION FOR TURN SIGNALS ACTIV
7.1 - Standard connections.....
7.2 - Connections for vehicles with separate lines..
8.1 - Connections and management by CAN-BUS line..........................
8.2 - Connections to door lock motor unit...........................
- VEHICLE CODE PROGRAMMING............................................................................
- SELF-LEARNING OF TURN INDICA
- ....................................
1
1 Acoustic signals.............................
of siren (art. 772 output
.................................................................
election (during alarm) for horns or additional siren...
- SYSTEM PROGRAMMING EXAMPLE......................
-
- UL
15.1 - Connections and positioning........
15.2 - Sensor adjustment........
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
2.0 - OPERA
Exclusion of sensors and comfort feature is bound to each single arming
cycle.
USER MANUAL
2.1 - COMPLETE SYSTEM ARMING
2.2 - SYSTEM ARMING WITH SENSOR AND COMFORT CONTROL EXCLUSION
Press the lock button on the
).
.
T the system should be disarmed and the ignition key turned “OFF” position;
proceed as follows.
.
.
.
!
!
vehicle original remote control; system arming is confirmed by a siren
chirp (if feature has been modified) and a flash of the turn indicators.
The system has a 30” pre-arming “neutral time” (indicated by the LED turned on steady
The driver can arm the system and exclude the internal volumetric protection and comfort function
Show the electronic key to its receptacle; the LED gives out a quick flash
Close all vehicle doors and press the lock button on the original remote control
System activation is confirmed by the standard optical/acoustic signals!
2
When this function is programmed, the system passively arms approx. 60” after ignition switch of and
after the last door is closed.
System activation is confirmed by the standard optical/acoustic signals.
SSIVE ARMING
If passive arming is activated, functioning of internal sensors and comfort output
(automatic window roll-up) are excluded.
Opening a door 60” before the system is armed causes the procedure to interrupt; it is
resumed once the door is closed.
2.4 - ARMING INHIBIT TIME
System inhibit arming time lasts approximately 30” and is signalled by the LED on;
.
it is possible to exit
the vehicle without triggering any alarm
