Bedienungsanleitung Gemini cdx 2400 (Seite 5 von 19) (Deutsch, Englisch, Französisch, Spanisch)

161703

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

CDX-2400

FUNCTIONS: (CONTINUED)

SINGLE: Pressing the SINGLEbutton engages SINGLEmode, in this

mode the CDX-2400 will play one song and then stop. Pressing the

SINGLE button again will thenactivateCONTINUOUS mode causing

the unit to play continuously (after the last track, the unit will return to

the first track of the disc and continuetoplay).

TIME: The TIMEBUTTON switches the time display between three

available sources, these three are TIMEELAPSEDonthetrack, TIME

REMAINING on the disc and and TIMEREMAINING on the track.

TIMEELAPSEDindicates how much time has currently gone by since the

play button was pressed, TIME REMAING ONDISC will count down the

time remaining on the entire disc and TIMEREMAINING ONTRACK

counts down the time that is left before the end of the track.

PITCH:Pushing the PITCHbutton (the button will light up blue)activates

the PITCHCONTROL SLIDE. The pitch or speed of the CDwill change

plus or minus 12% depending on the position of the PITCHCONTROL

SLIDER. Push the PITCHbutton again to deactivate this mode.

PITCHCONTROL SLIDE: Movingthe PITCHCONTROL SLIDE

up ordown will lower or raise thepitch percentage+or - 12%.

PITCHBEND:Pushing thePITCHBENDBUTTONS will automatically

raise thepitch up to +16% or lower thepitch down to -16%from the

existing pitch setting.Releasing thebuttons will return the pitch

to theoriginal pitch setting. You can use this function to match the beat

when mixingfrom onesongto another

LOOPSECTION: ALOOP repeatsthesection between the entry point

(IN) and the exitpoint(OUT). To set a loop while the unitis playing,

start by pressing the INBUTTON(it will light up)and when you reach

the desiredend loop point press the OUTBUTTON(it willalsolightup).

The loop will continue playing until you presstheOUTBUTTONagain

allowing the musicto continuefrom that point on, to re-engage the loop

you must press the RELOOPBUTTON. When you have releasedyour

loop the OUTBUTTONwill turn OFF andtheIN BUTTONwill remainlit

to indicatethat your loopis storedin theCDX-2400memory. Pressing

the INBUTTONagain while the unit is playing will erasethe previously

saved loop while saving your new loop entry point. Press OUT to exit the

loop and saveanew completeloop.

PressRELOOP toreturn tothe beginning of the previously saved loop

from normalplay. Press RELOOPrepeatedly tocausethe loop to stutter.

NOTE:THEFIRSTLOOP WILLHAVE APAUSEAT THEEXITPOINT,

WHILEALL OTHERSWILLBESEAMLESS.

PLAY/PAUSE: Each pressof the PLAY/PAUSE BUTTON

causesthe operation to changefrom PLAYto PAUSEor from PAUSE

back to PLAY. ThePLAY/PAUSEBUTTONremains litwhenin PLAY

mode, while it blinks inPAUSEmode.

CUE: While the unit isplayingand after the cuepointhas been

programmed,pressing CUEwillcausethe CD player to enter the

PAUSEmode(PLAY/PAUSEBUTTONblinks) atthe programmed cue

point(the CUELEDislit).Holding down the CUE button

changes the function to preview , and allows you to stutter start or play

from theprogrammedCUEPOINT Releasing the CUE button will return

the CDto the preset CUE point.

STOPBUTTON: When pressedthe STOPBUTTONstops the playback

of the CDplayer.

TRACK SELECTION: TheTRACKSELECTION buttons let you select

the track toplay. +10allows you to scanthroughthe track selection

in increments of 10.TRACK SKIP allows you to scanthrougheach

track one atatime.

OTE:ONCEYOU HAVESKIPPEDTOANOTHERTRACK,YOUMAYNOTGOBACK

OYOUR PROGRAMMEDCUEPOINT.YOUMUSTBEGINYOUR CUESELECTION

OVERAGAIN,THECUEWILL BEPRESETTOTHEBEGINNINGOFTHENEWLEYSE-

LECTEDTRACK.

TROUBLESHOOTING:

- If a discwillnot play, check to seeif the discwas loadedcorrectly

(labelsideup). Also check the disc for excessive dirt, scratches,etc.

- If the disc turns but there isno sound, check the cable connections,

if they are ok,check youramplifier orreciever.

-If the CDskips, check the CDfor dirt or scratches.Do notassume that

the CDplayer is defective.Many cd’sare recordedoutof spec and

will skip onmostor all CD players.Before sendingthe unit for repair,

try playing aCD that you are sure playsproperly.

SPECIFICATIONS:

GENERAL:

Type................................................................................Compact Disc Player

Disc Type...................................Standard Compactdiscs(12 cm & 8cm)

Time Display......................Track Elapsed,Track Remain,or Total remain

Variable Pitch.......................................± 12%SliderwithResume Switch

Pitch Bend............................................................................± 16%Maximum

Instant Start....................................................................Within0.03seconds

Installation...........................................................................................19" each

Dimensions.........Mainunit:19" x3.5"x10" (482.6x88.9 x 254mm)

…..............…Remote unit: 19" x 3.5" x2.75"(482.6x133 x 70mm)

Weight Per Unit................................................Main unit: 13.7 lbs. (5.2 kg)

…............................................................................Remoteunit:4lbs.(1.5kg)

AUDIOSECTION:

Quantization.....................................1Bit Linear/Channel, 3 Beam Laser

Oversampling Rate..............................................................................8Times

Sampling Frequency..........................................................................44.1 kHz

Frequency Response............................................................20 Hzto 20kHz

TotalHarmonicDistortion...................................................Less Than 0.05%

Signalto Noise Ratio..............................................................................85 dB

Dynamic Range........................................................................................85dB

Channel Separation.................................................................85 dB (1 KHz)

OutputLevel...................................................................2.0 +/- 0.2VR.M.S.

Power Supply.......................................................AC 115/230V, 60/50Hz

SPECIFICATIONSAND DESIGNARE SUBJECTTOCHANGEWITH-

OUTNOTICEFORPURPOSEOF IMPROVEMENT.

Gemini cdx 2400 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gemini cdx 2400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info