Bedienungsanleitung Gemini CDX-2500G (Seite 5 von 19) (Deutsch, Englisch, Französisch, Spanisch)

503629

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

CDX-2500G

FUNCTIONS: (

CONTINUED)

SINGLE: PressingtheSINGLE button engagesSINGLEmode, in this

ode the CDX-2500G willplay one song and then stop.Pressing the

SINGLE button again will then activateCONTINUOUS mode causing

the unit to play continuously (after the last track, the unit will return to

the first track of the disc and continue to play).

TIME: The TIMEBUTTON switches the time displaybetween three

availablesources, these three are TIMEELAPSED on the track, TIME

REMAINING on the discandand TIME REMAINING on the track.

TIME ELAPSED indicates howmuch time has currently gone by since the

playbutton waspressed, TIME REMAING ONDISC will count downthe

time remaining on theentirediscand TIME REMAINING ONTRACK

counts down the time that is left beforethe end of thetrack.

PITCH:Pushing the PITCH button(thebuttonwill light up blue) activates

the PITCHCONTROL SLIDE. Thepitch or speed of theCD will change

plus or minus 12%dependingon the position of thePITCH CONTROL

SLIDER. Push the PITCHbutton againto deactivate this mode.

PITCH CONTROL SLIDE: Movingthe PITCHCONTROL SLIDE

upor down willlower orraisethe pitch percentage+ or-12%.

PITCH BEND: Pushing the PITCH BEND BUTTONS will automatically

raise thepitch up to+16% orlower the pitch down to-16% from the

existingpitch setting.Releasing thebuttonswill return thepitch

tothe original pitch setting. You canuse thisfunction to match the beat

whenmixingfromone songto another

LOOPSECTION: A LOOP repeats thesection betweenthe entry point

(IN)and theexit point(OUT). Toset a loopwhile theunit isplaying,

startbypressing the INBUTTON(it will light up)and when youreach

thedesiredend looppointpress theOUT BUTTON (itwill also light up).

Theloop will continueplaying until youpress theOUT BUTTONagain

allowingthe musicto continuefromthat point on,to re-engagethe loop

you must press theRELOOPBUTTON.Whenyouhavereleased your

loopthe OUTBUTTONwillturnOFF andthe IN BUTTONwill remain lit

toindicatethat your loop is stored in theCDX-2500Gmemory.Pressing

theIN BUTTON again while the unitis playingwill erase the previously

saved loopwhilesaving yournewloop entrypoint.Press OUTto exit the

loopand save anew complete loop.

Press RELOOPto return tothe beginning of thepreviously savedloop

from normalplay.PressRELOOP repeatedlyto causethe loop to stutter.

NOTE: THEFIRSTLOOPWILLHAVE APAUSEATTHE EXITPOINT,

WHILEALLOTHERSWILLBE SEAMLESS.

PLAY/PAUSE:Each pressof the PLAY/PAUSEBUTTON

causes the operationto change from PLAYtoPAUSE or fromPAUSE

back toPLAY.The PLAY/PAUSE BUTTONremainslit whenin PLAY

mode,while itblinksin PAUSEmode.

CUE:Whilethe unit isplaying andafter thecue point has been

programmed, pressing CUE willcausethe CD player to enter the

PAUSE mode(PLAY/PAUSE BUTTON blinks) at the programmedcue

point (the CUELED islit).Holding downthe CUE button

changes thefunctionto preview ,and allowsyouto stutter start orplay

from theprogrammedCUEPOINT Releasing the CUE buttonwill return

theCD tothe presetCUE point.

STOPBUTTON: When pressedthe STOPBUTTONstopsthe playback

of the CDplayer.

TRACKSELECTION: TheTRACKSELECTIONbuttonslet you select

thetrack toplay. +10 allows you to scan through thetrack selection

inincrementsof 10. TRACKSKIPallows you toscan througheach

trackone ata time.

NOTE: ONCEYOU HAVE SKIPPED TOANOTHERTRACK, YOUMAYNOT GO BACKTOYOURPRO-

RAMMEDCUEPOINT. YOUMUST BEGIN YOURCUE SELECTION OVERAGAIN,THE CUEWILLBE

PRESETTOTHE BEGINNINGOF THENEWLEYSELECTEDTRACK.

IDEOGRAPHICS OUT: . For CD+G (Karaoke)support,using RCA

cables, plug oneRCAconnector intothe CDGOUTPUT & plugthe

other connectorinto the Videoinputof your graphicsplayer monitor.

DGOPERATIONS:

1. After making theproperconnections & thepowerfor the unit ison,

press the OPEN/CLOSE button,place a CDG inthe DISC TRAY&

press the OPEN/CLOSE button again. The traywillclose intothe unit.

2. Turnon themonitor screen & waituntilthe CDX-2500Greadsthe

CDGdisc. When the monitor ison& thedisc isread, the title track

should appearon the screen.

3. Push theTRACKSKIP buttons toselect thetrack you wantto play.

4.Pressthe PLAY/PAUSE buttons & theunit willinstantlyplay.

TROUBLESHOOTING:

-If adisc willnot play,check tosee if thedisc was loaded correctly

(label side up). Also check thedisc for excessivedirt, scratches, etc.

-If thedisc turnsbut there is no sound, check thecable connections,

if they areok, check youramplifieror reciever.

-If theCD skips, check theCD for dirt orscratches. Donot assume that

theCD playeris defective. Manycd’s are recorded outof spec and

willskip onmost orall CDplayers.Before sendingthe unitforrepair,

tryplaying a CD that you aresure plays properly.

SPECIFICATIONS:

GENERAL:

Type................................................................................Compact Disc Player

DiscType...................................StandardCompact discs (12cm & 8 cm)

TimeDisplay......................TrackElapsed,Track Remain,or Total remain

VariablePitch.......................................±12% Slider withResume Switch

Pitch Bend............................................................................± 16% Maximum

Instant Start....................................................................Within 0.03 seconds

Installation...........................................................................................19" each

Dimensions.........Mainunit:19" x 3.5"x 10"(482.6 x88.9 x 254mm)

…….........…Remoteunit: 19" x 3.5"x3.5"(482.6 x88.9 x 88.9 mm)

Weight Per Unit..........................................Main unit: 11.35 lbs. (5.14 kg)

…...................................................................Remote unit: 3.85 lbs.(1.74kg)

AUDIO SECTION:

Quantization.....................................1 BitLinear/Channel, 3Beam Laser

Oversampling Rate..............................................................................8Times

Sampling Frequency..........................................................................44.1kHz

Frequency Response............................................................20Hz to20 kHz

Total Harmonic Distortion...................................................LessThan 0.05%

Signal to NoiseRatio..............................................................................85 dB

Dynamic Range........................................................................................85dB

Channel Separation.................................................................85dB (1KHz)

Output Level...................................................................2.0 +/- 0.2V R.M.S.

PowerSupply.......................................................AC 115/230V, 60/50Hz

SPECIFICATIONS ANDDESIGNARE SUBJECTTOCHANGE WITHOUTNOTICE FOR

PURPOSEOFIMPROVEMENT.

Gemini CDX-2500G Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info