E7
Cleaning Replacement Filters
1. Open the Filter Cover.
2. White Cotton Grease Filter may be
washed in hot soapy water. Rinse
and allow to air dry.
3. Clean the inside of the cover with a
damp soapy sponge. Rinse and
dry thoroughly.
4. Insert Charcoal Odor Filter on the
bottom of Removable Lid, followed
by a clean Grease Filter, then replace
the Filter Cover.
NOTE:
For replacement filters, call
customer service at (877) 207-0923.
FOOD TEMP. SETTING TIME (MINUTES)
Chicken Strips 375° F 5 to 8
Chicken pieces, bone-in 360° F 15 to 20
Fish, Battered, fresh 320° F 8 to 10
French fries, frozen 375° F 3 to 5
Fritters 375° F 2 to 4
Onion Rings 375° F 3 to 5
Shrimp, breaded 375° F 2 to 4
Frying Time and Temperature
The frying times in this chart are a guide and should be adjusted to suit the
different quantities or thickness of food and to suit your own taste.
E6
WARNING: Always turn control to “OFF”
then disconnect plug from wall outlet
BEFORE disconnecting BREAK-AWAY
CORD.
CAUTION:
• Do not immerse cord sets in water
or any liquids.
• Do not attempt to defeat the
detachable magnetic Break-away
cord system by trying to
permanently attach cord set to
product.
• Do not stick pins or other sharp
objects in holes on magnetic cord set.
• Do not use any type of steel wool to
clean magnetic contacts.
1. Unplug from outlet and allow unit
to cool completely.
2. Remove Break-away magnetic cord
from the fryer.
3. Clean the outside of the Deep Fryer
and lid with a damp cloth.
CAUTION:
Do not use abrasive pads or
alcohol.
4. Remove Frying Basket. Wash the
Frying Basket in the dishwasher or
with hot soapy water. Rinse and
towel dry carefully.
5. Lift Control Panel Assembly up
from backside of fryer.
CAUTION:
Be sure you have allowed
enough time, after using, for Control
Panel Assembly to cool down
completely.
Carefully lift Oil Reservoir out by
holding the rim of the bowl. See Tips
for Oil Use and Storage on page 8.
6. The Basket, Lid (remove Filters),
and Oil Reservoir are dishwasher
safe. Dry all parts thoroughly after
cleaning.
7. The Control Panel Assembly should
never be immersed into water or
other liquids. Gently clean the outer
surface of the Control Panel
Assembly with a damp cloth
containing mild soap solution or
plain water.
8. Ensure that both the
lid and the Oil Reservoir are
completely dry after washing and
before use.
9. After cleaning,
reassemble
Control Panel
Assembly onto
the Exterior (See
figure 3). The
Control Panel
Assembly must
be attached
properly to the
back of the
Stainless Steel
Exterior or the appliance will not
operate.
10.For storage, Basket Handle can be
folded down to fit inside the Oil
Reservoir.
How to Clean Your Deep Fryer
Figure 3
disconnected, the user should
immediately unplug the cord set from
the wall outlet, turn control to OFF, then
reconnect the magnetic cord to the
Deep Fryer and then to the wall outlet.
NOTE: Your Deep Fryer is provided with
a safety protection device:
If the Control Panel Assembly is not
properly placed on the Exterior, the
Control Panel Assembly will not
operate.
How to Use Your Deep Fryer (Cont.)
