Bedienungsanleitung General Electric AEE18 Room Airco (Seite 4 von 56) (Englisch, Französisch, Spanisch)

502904

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Heat

About the controls on the air conditioner.

Controls

Fan Fan

Remote Control

Delay timer Increase

Auto Fan on

Fan speed Increase

Unit power on/off

NOTE: The display always

shows the room temperature

except when setting the Set

temperature or the Delay timer.

Air Conditioner Controls

Light indicates the

delay timer is set.

Light indicates the unit

is in the temperature or

delay time Set mode.

Delay 1–24hr

Delay timer

Decrease

Mode select

Fan speed

Decrease

Temperature

set Increase

and Decrease

Features and appearance will vary.

Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

Power Pad

Turns air conditioner on and off. When turned

on, the display will show the room temperature.

Display

Shows the room temperature or time remaining

on the Delay timer. Shows the Set temperature

while setting the temperature in Heat, Cool or

Energy Saver modes. The Set light will turn on

while setting.

Temp Increase Ÿ /Decrease ź Pads

Use to set temperature when in Heat, Cool or

Energy Saver mode. The Set light will turn on

while setting.

Delay Timer IncreaseŸ (+) /Decrease ź(–)

Pads

Each touch of the Increase Ÿ / Decrease ź

pads on the unit or the Increase + / Decrease

– pads on the remote control will set the delay

time when using the Delay 1–24hr timer. The

Set light will turn on while setting.

Fan Speed Pads

Use to set the fan speed to Low, Med, High

or Auto on the unit. NOTE: On the remote

control, use the fan speed Increase + /

Decrease – pads to set the fan speeds to Low,

Med or High. Use the Auto pad to turn Auto

fan on.

Mode Pad

Use to set the air conditioner to Heat, Cool,

Energy Saver or Fan Only mode.

Delay Pads

'HOD\21³When the air conditioner is off, it can

be set to automatically come on in 1 to 24 hours

at its previous mode and fan settings.

'HOD\2))³When the air conditioner is on,

it can be set to automatically turn off in 1 to

24 hours.

How to set:

Press the Delay 1–24hr pad on the unit or on the

remote control. Each touch of the Increase Ÿ

/ Decreaseźpads on the unit or the Increase

+ / Decrease – pads on the remote control will

set the timer in 1-hour intervals. The Set light will

turn on while setting.

To review the remaining time on the Delay

1–24hr timer, press the Delay 1–24hr pad on the

unit or on the remote control. Use the Increase

Ÿ / Decrease ź pads on the unit or the

Increase + / Decrease – pads on the remote

control to set a new time if desired.

To cancel the timer, press the Delay 1–24hr pad

until the light on the Delay 1–24hr pad goes off.

Note: The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to

degree Celcius (°C), press the Temp Increase Ÿ and Temp Decrease ź buttons together and hold for 3

seconds. Repeat the process to change back to degree Fahrenheit (°F)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

General Electric AEE18 Room Airco Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info